Start-up
34
Pos: 16.24 /Überschrif ten/Überschrif ten 2/A-E/A nschluss Beleuc htung @ 33\ mod_125438530 8979_78.doc @ 3 19105
6.3 Lighting connection
Pos: 16.25 /BA/I nbetriebnahme/ Schwader/Ansc hluss Beleucht ung/Anschluss B eleuchtung S wadro 807 810 S wadro 907 @ 2\ mod_1202391 626522_78.doc @ 59135
SW9070004
2
3
1
1
Fig. 9
The lighting system is connected via the 7-pin connection cable (1).
To do this:
• Insert the 7-pin connection cable plug (1) into the appropriate socket (2) of the tractor.
• Insert the 7-pin connection cable plug (1) into the appropriate socket (3) of the machine.
• Position the cable so that it will not come in contact with the wheels.
Pos: 16.26 /BA/I nbetriebnahme/ Schwader/Hin weis Sauberkeit der Stecker und Steckdosen @2 \mod_1202 399563131_78. doc @ 59273
Note
Before inserting the plugs, make certain the plugs and sockets are clean and dry. Dirt and
moisture may result in short circuits!
Pos: 16.27 /BA/--- --Seitenumbruc h------ @ 0\mo d_119617531 1226_0.doc @ 41 65
To Next Page
Loading...
