Need help?Do you have a question about the Krone Big Pack 88 / MultiCut and is the answer not in the manual?
General| Brand | Krone |
|---|---|
| Model | Big Pack 88 / MultiCut |
| Category | Farm Equipment |
| Language | English |
Lists comprehensive technical data including PTO, hitching, hydraulics, and lubricants.
Details PTO shaft speed, hitching, support, pick up drum, and feed rake specifications.
Explains how safety instructions are marked with danger signs and general function indicators.
Provides detailed safety rules for operation, traffic, attachment, and general machine use.
Details safety precautions for trailer implements, PTO operation, and hydraulic systems.
Addresses tyre safety, maintenance procedures, electrical safety, and replacement parts.
Explains the purpose of safety devices and warns about potentially dangerous positions.
Illustrates safety decals and their meanings, covering PTO speed, rotating augers, and hot surfaces.
Covers personnel qualifications, risks of not following rules, and safe working practices.
Covers safety for tyres, hydraulic systems, and general system precautions.
Covers restrictions on modifications, use of replacement parts, and prohibited operating modes.
Provides safety notes and procedures for adapting the main PTO shaft length.
Provides safety notes and instructions for installing the PTO shaft on the machine and tractor.
Provides safety instructions for driving on public highways, including speed and securing requirements.
Provides safety notes and procedures for hitching the baler to the tractor.
Provides safety notes regarding mounting and use of the maintenance platform.
Covers safety precautions for detaching the baler, including parking, hydraulics, and PTO shaft removal.
Provides a layout of the control box, detailing buttons, indicators, and their functions.
Explains how to adjust density force using bar charts and buttons for different crop types.
Provides remedies for deviations in density readings, adjusting nominal density and pressure.
Describes how alarm messages appear, are indicated by horn, and can be acknowledged or reset.
Emphasizes safe routing and securing of connecting cables between tractor and baler.
Details how density force is monitored, regulated by the computer, and displayed.
Explains how to check the blade status and indicates faults in the blade safety mechanism.
Lists functions monitored and regulated by the on-board computer, such as baling thrust and alarms.
Explains how baling thrust is regulated by an electronic-hydraulic system and pressure gauges.
Provides detailed instructions for adjusting the twine bar and its control rod assembly.
Details how to adjust the twine brake tension for optimal knot tying performance.
Details the procedure for re-adjusting the flywheel brake power and dimensions.
Outlines steps to check twine brake tension, including manual knotting and tension adjustments.
Lists safety notes for working on the hydraulics system, including pressure release and part compliance.
Covers safety for draining compressed air reservoir and general information on air brake systems.
Details maintenance for the on-board hydraulics, including oil and filter changes.
Details how to position and adjust the twine mount for correct twine insertion and clamping.
Explains adjustment of the knotter hook spring tension to prevent knot formation issues.
Covers safety notes for maintenance, assembly, and operation of the MultiCut system.
Covers safety precautions and step-by-step instructions for changing cutting blades.
Details how to adjust yarn tension for the upper yarn strand using brakes and a spring arm.
Lists common double knotter faults, their causes, and remedies, referencing relevant chapters.
Explains how to set blade protection tension and projection for different crop conditions.
Explains how to adjust yarn tension for the lower yarn strand and check the knotting process.
Explains how to adjust the yarn latch position and the distance for proper yarn capture.
Details how to set the cutting length based on the number of blades used for Big Pack MultiCut.
Provides critical safety notes for all maintenance, assembly, repair, and adjustment work.
Explains issues with baling thrust regulation, emergency mode operation, and adjustment procedures.
Lists common faults like horn/lamp errors, baling ram jams, loose/firm packs, and pick-up jams.
Details faults related to the knot tying mechanism, including snagged twine and incorrect knot formation.
Addresses fraying knot ends, yarn path errors, and knots hanging on the knotter hook.
Discusses twine breakage, chafing, yarn path errors, and knots formed with previous pack twine.
Troubleshoots blockages and issues in the central lubrication system and distributor.
Describes the cause and remedy for the needle yoke not going up, related to a shear bolt.
Addresses faults where the cutting rotor or pick-up remain stopped and knotter/needle yoke jams.
Explains how to perform sensor tests using the diagnostic program, including auto and manual tests.
Details how to individually check each sensor and adjust its settings based on displayed values.
Details how to individually test valves, switch them on/off, and check their status.
Provides safety warnings regarding operating errors, technical modifications, and contacting service partners.
Explains how to test individual valves, check their status, and control them using buttons.
Presents the complete electrical circuit diagram for the Big Pack baler models.
Lists all alarm numbers, their possible causes, and recommended remedies for Big Pack 88/127/128.
To Next Page