Krone Big Pack 890 HS User Manual

Original operating instructions
BiG PACK Baler
<v>T - Typ1</v> BiG Pack 890 HS/XC </v>
<v>T - Typ2</v>
BiG PACK 1270 HS/XC </v>
<v>T - Typ3</v>
BiG PACK 1290 HS/XC </v>
<v>T - Typ4</v>
BiG PACK 1290 HDP / XC HS </v>
<v>T - Typ5</v> </v>
<v>T
-
Typ6</v></v>
( <v>T - ab Masch.-Nr.</v> from serial no. </v> : 819 240)
<v>T - Bestell-Nr.</v> Order no. </v> : 150 000 137 00 en
<v>B - Titelbild</v> </v>
17.03.2011

Krone Big Pack 890 HS Specifications

General

Brand	Krone
Model	Big Pack 890 HS
Category	Farm Equipment
Language	English

Summary

2 Introduction

2.1 Purpose of Use

Describes the intended application of the BiG PACK balers for agricultural work.

2.5 Intended Use

Specifies that the Big Pack baler is built exclusively for agricultural work.

2.6 Technical data

Provides detailed technical specifications for different BiG PACK models.

2.9 Connection prerequisites on tractor

Outlines the necessary tractor connections for the baler.

2.11 Machine overview

Provides visual identification of key components on the left side of the baler.

3 Safety

3.2 Identification of the hazard warnings

Explains the meaning of DANGER, WARNING, CAUTION, and NOTE symbols.

3.3 Safety Instructions and Accident Prevention Regulations

Lists general safety and accident prevention regulations for operating the machine.

3.8 Maintenance

Covers general safety precautions for performing maintenance tasks.

3.16 Parking brake

Details the operation and safety precautions for the parking brake.

4 Commissioning

4.1 Adjusting the drawbar height

Provides instructions for adjusting the drawbar height for proper hitching.

4.3 Mounting onto the Tractor

Explains the procedure for attaching the machine to the tractor safely.

5 Start-up

5.2 Hydraulics

Covers the connection and safety instructions for the hydraulic system.

5.7 Electrical connections

Details the required electrical connections for the machine's operation.

6 Driving and Transport

6.1 Preparations for road travel

Lists essential tasks and safety measures before driving the machine on public roads.

6.3 Handling the Coaster/Steering Axle (Special Equipment)

Explains how to handle the coaster/steering axle for safe operation and transport.

6.4 Parking

Provides instructions and safety warnings for parking the machine.

7 KRONE ISOBUS-Terminal CCI 100

7.2 ISOBUS short cut button

Describes the function and safety precautions of the ISOBUS short cut button.

7.4 Manual mode

Explains the manual mode operation and basic screen layout of the terminal.

7.10 Main menu 1 'Settings'

Details the 'Settings' menu structure and its sub-menus.

7.12 Main menu 4 „Service“

Outlines the 'Service' menu for diagnostics and adjustments.

9 Operation

9.1 Pick up

Describes the operation and adjustment of the pick-up unit.

9.4 Cutting system

Provides general information about the cutting system and its components.

9.6 Removing blockages

Explains the procedure for safely removing blockages in the cutting system.

9.11 Twine

Covers the electrical twine empty display and twine motion indicators.

10 Settings

10.1 Tying unit

Details the tying unit, including twine insertion and threading.

10.2 Setting the needles

Covers the lateral setting and height adjustment of the needles on the knotter.

10.6 Twine bar

Explains the setting and checking of the twine bar for single and double knotters.

10.8 Knotter

Provides information on locking the tying process and knotter start-up.

10.11 Variable filling system (VFS)

Details the VFS system, including feeler rocker assembly and adjustments.

11 Maintenance

11.1 Special Safety Instructions

General safety instructions for all maintenance, assembly, repair, and adjustment work.

11.4 Tightening Torques

Provides a table of tightening torques for various screw sizes.

11.7 Tyres

Covers warnings and procedures for tyre fitting and maintenance.

11.10 Adjusting the hydraulic system

Explains how to adjust the comfort hydraulic system on the tractor.

11.15 Filling Quantities and Lubrication Designations for Gearboxes

Lists lubricant quantities and designations for various gearboxes.

12 Maintenance - Brake System

12.1 Special Safety Instructions

Highlights safety precautions related to the brake system.

12.2 Compressed-air reservoir

Provides information on the compressed air storage tanks and their maintenance.

12.2.1 Setting the Transfer Mechanism

Explains how to check and adjust the transfer mechanism linkage.

13 Maintenance – lubrication

13.1 Special Safety Instructions

General safety instructions for lubrication tasks.

13.2 Lubricants

Lists recommended lubricants based on mineral oil and bio-lubricants.

13.6 Lubrication points

Provides a comprehensive list of lubrication points and intervals for various models.

14 Placing in Storage

14.1 Special Safety Instructions

General safety precautions to be observed before placing the machine in storage.

14.2 At the End of the Harvest Season

Describes the procedure for preparing the machine for storage after the harvest season.

14.3 Before the Start of the New Season

Outlines tasks to perform before putting the machine back into service.

15 Malfunctions - Causes and Remedies

15.2 General malfunctions

Lists common malfunctions with their potential causes and remedies.

15.3 Malfunctions on the knotter

Details specific malfunctions related to the knotter mechanism.

15.4 Troubleshooting in the central lubrication

Provides guidance for troubleshooting issues with the central lubrication system.

16 Appendix

16.1 Hydraulic System Circuit Diagrams

Presents the hydraulic system circuit diagrams for different machine versions.

16.6 Electrical circuit diagram

Provides the electrical circuit diagram for the machine.