KRONE ISOBUS-Terminal CCI 100
108
Pos: 24.59 /BA/Inf o-Center/CC-ISOBUS- Terminal/CCI-Bi G Pack/Hauptmenüs/Haupt menü 1 Einstellungen/ Menü 1-3 „Empfindlichkei t-Richtungsan zeige“ @ 44\mod_1275368852 531_78.doc @ 391051
7.10.3 Menu 1-3 „Sensitivity of the direction display“
CC000056
1-3
Fig. 67
Setting the sensitivity of the direction display.
Calling the menu
Main menu 1 “Settings” is displayed.
• You can select menu 1-3
by pressing function key or . The symbol is
shown in reverse colors
• Press function key
The display shows menu 1-3 “Sensitivity of direction display”.
The progress bar indicates the set sensitivity. The higher the bar, the greater the sensitivity of
the direction display. The symbol
in the upper line indicates that the displayed value is
saved.
Setting and saving the sensitivity of the direction display.
The higher the sensitivity of the direction display is set, the stronger the motion indication in the
form of arrows (1) (
).
• Set the sensitivity with the function key
or , the symbol in the top line goes out
• Press the function key
. The set sensitivity is saved and the symbol appears in
the upper line
• Pressing the function key
closes the called up menu
• Pressing the function key
and holding it down brings up the basic screen
Pos: 24.60 /BA/-----Seitenumbruch------ @ 0\mod_1196175311226_ 0.doc @ 4165
To Next Page
Loading...
