Krone Big Pack 890 HS - Menu 1-6-3 Blow Time

KRONE ISOBUS-Terminal CCI 100
114
Pos: 24.71 /BA/Inf o-Center/CC-ISOBUS- Terminal/CCI-Bi G Pack/Hauptmenüs/Haupt menü 1 Einstellungen/ Menü 1-6-3 „Blaszeit“ @ 44\ mod_1275378989046_ 78.doc @ 391282
7.10.5.2 Menu 1-6-3 „Blow time“
CC000061
1-6-3
1..n
CC000035
1-6-3
Fig. 71
You can adjust the blowing time on the knotter in this menu.
Calling the menu
Main menu 1-6 "Knotter blowing" appears.
• You can select menu 1-6-3
by pressing function key or . The symbol is shown
in reverse colors
• Press function key
The display shows menu 1-6-3 "Blow time".
The bar display and value (A) indicate the preselected cleaning time (blow time) in seconds.
The symbol
in the upper line indicates that the displayed value is saved.
• Set the desired blow time with the function key
or , the symbol in the top line
goes out
Press the function key
. The set correction value is saved and the symbol in the
upper line appears
• By pressing the function key
the value of the factory setting appears (press function
key
, the value of the factory setting will be saved, the symbol appears in the
upper line)
• Pressing the function key
closes the called up menu
• Pressing the function key
and holding it down brings up the basic screen
Pos: 24.72 /BA/-----Seitenumbruch------ @ 0\mod_1196175311226_ 0.doc @ 4165