Settings
219
Pos: 32.114 /BA/Einste llungen/Großpacken presse/Packensc hurre einstellen @ 24\mod_1 241442284883_78.d oc @ 244974
10.14 Setting the bale chute
Fig. 161
When it is unfolded, the bale chute represents an extension of the bale channel chamber. For
big bales to be set down on the ground correctly, the back edge of the bale chute must not be
too high above the ground. Otherwise the bales will be damaged when they are placed on the
ground.
• The inclination of the bale chute to the ground can be sued to adjust the length of the
retaining chain (2) of the bale chute
• To do this, adjust the nut (1) on either side of the baling channel
Pos: 32.115 /BA/-- ---Seitenumbruch------ @ 0\mod_1196175311226_0.doc @ 4165
To Next Page
Loading...
