Start-up
58
Pos: 18.4 /Überschri ften/Überschri ften 2/A-E/Anbau an den Trak tor @ 0\mod_1199717845194_7 8.doc @ 34039
5.1 Mounting onto the Tractor
Pos: 18.5 /BA/Sic herheit/Gefahrenhin weise/Großpackenpres se/An-/ Abau der Maschine Bi G Pack @ 17\mod_12362569 86675_78.doc @ 204111
DANGER! - Attaching / removing the machine
Effect: Danger to life or serious injuries.
• The machine must only be connected to tractors that are equipped with a matching hitch
• When the tractor is put back in front of the machine, there must be no one between the
tractor and the machine
• Observe the maximum supporting and tensile load of the hitch on the tractor
Pos: 18.6 /BA/Er stinbetriebnahme/Großpac kenpressen/Anhän gen an den Traktor @ 17\mod_12362 57235956_78.doc @ 204132
Fig. 22
The machine comes standard equipped with a ready-to-use hitch hole of Ø 40 mm (DIN 11
026). Depending on the specific requirement, the following hitches are also available:
• Ball-head hitch (K 80)
• Rotating towing eye
• Hitch connection (export only)
• Hitch and secure the machine according to the regulations on the hitch of the tractor
Pos: 18.7 /BA/--- --Seitenumbruch-- ---- @ 0\mod_1196175311226_0. doc @ 4165