Krone Big Pack 890 HS - 9.1 Pick up

Operation
154
Pos: 30.4 /Überschri ften/Überschri ften 2/P-T/Pick up @ 1\mod_12 01791975201_0.doc @ 54586
9.1 Pick up
Pos: 30.5 /Überschri ften/Überschri ften 2/P-T/Pick up Grundein stellung @ 19\mod_123857 6636385_78.doc @ 221585
9.2 Default Setting (Working Height Setting)
Pos: 30.6 /BA/Einste llungen/Pick- up / Rollenniederhalter/Hin weis Fahren im Vorgewend e @ 20\mod_1238578490213_ 78.doc @ 221874
Note
Lift the Pick-up for driving in the headland or when driving backward!
Pos: 30.7 /BA/Sic herheit/Pick-up / Rollenniederhalter/Gefahr Arbeiten an bzw. unter der Pick-up @ 19\mod_1238575749 713_78.doc @ 221447
DANGER! - Working on or under the Pick-up!
Effect: Danger to life or serious injuries
To work on or under the Pick-up, always secure it against unintentional lowering by moving the
shut-off valve on the left side of the machine.
Pos: 30.8 /BA/Einste llungen/Pick- up / Rollenniederhalter/P ick up Grundeinstellun g Bild Big Pack @ 20\mod_1238577 697385_78.doc @ 221849
Fig. 90
Pos: 30.9 /BA/Einste llungen/Pick- up / Rollenniederhalter/P ick up Grundeinstellun g @ 20\mod_1238577186541_ 78.doc @ 221681
The working height can be adjusted on the guide wheels (3) on either side of the pick-up. In
order to carry out the adjustment, lift and secure the pick-up. Pull the spring cotter pin (2) and
move the guide wheels into the desired position on the perforated bar (1). Secure the guide
wheels in place with the spring cotter pin.
Note
Make certain that the guide wheels on either side of the pick-up are in the same position on the
perforated bar.
Pos: 30.10 /BA/-----Seitenumbruch------ @ 0\mod_1196175311226_ 0.doc @ 4165