Krone Big Pack 890 HS - Wheel Chocks

Driving and Transport
79
Pos: 20.54 /Überschri ften/Überschri ften 3/U-Z/Unterlegkei le @ 33\mod_12542025556 60_78.doc @ 318451
6.4.2 Wheel chocks
Pos: 20.55 /BA/Fahren und Transport/Großpac kenpresse/Unterlegkei le BP 890_1270_1290 HS Baureihe @ 63\mod_12996685 10278_78.doc @ 574581
The wheel chocks (1) are located at the rear on the right and left next to the bale channel
chamber on the yoke.
1
BPHS0024
Fig.40
• Always place the wheel chocks (1) in front of and behind the tyres (this will prevent the
machine from rolling away).
Note
If the machine has a guided coast-down tandem axle (optional), it must be secured with wheel
chocks on the front axle to prevent it from rolling away.
Pos: 21 /BA/-----Seitenumbruch------ @ 0\mod_1196 175311226_0.doc @ 4165