KRONE ISOBUS-Terminal CCI 100
110
Pos: 24.63 /BA/Inf o-Center/CC-ISOBUS- Terminal/CCI-Bi G Pack/Hauptmenüs/Haupt menü 1 Einstellungen/ Menü 1-5 „Zentralschmier ung“ T1/2 HS Baureihe @ 63\ mod_1300085171881_78. doc @ 577666
7.10.4 Menu 1-5 „Central lubrication“
CC000075
1-5
CHECK
Fig. 68
(On machines with central lubrication)
Setting lubrication intervals and lubrication duration.
Calling the menu
Main menu 1 “Settings” is displayed.
• You can select menu 1-5
by pressing function key or . The Symbol is shown in
reverse colors
• Press function key
The display shows menu 1-5 “Central lubrication”.
The current status is displayed as a symbol:
The display shows menu 1-5 “Central lubrication”.
The upper value (A) shows the time for the lubrication process. The lower value (B) shows the
time for the lubrication pause.
The symbol
in the upper line indicates that the displayed value is saved.
The lubrication duration can be increased by several minutes. Central lubrication is set
to optimal levels at the factory.
Factory setting:
Lubrication duration: 20 min (A)
Lubrication pause: 5 min (B)
Capacity of the container 4.5 kg
Pos: 24.64 /BA/-----Seitenumbruch------ @ 0\mod_1196175311226_ 0.doc @ 4165
To Next Page
Loading...
