Krone Big Pack 890 HS - Adjusting the Variable Filling System (VFS); Zero Position

Settings
212
Pos: 32.109.8 /Übersc hriften/Überschr iften 3/A-E/Einste llen des Variablen Füllsy stems (VFS) @ 63\mod_1299 824731811_78.doc @ 576265
10.11.2 Adjusting the Variable Filling System (VFS)
Pos: 32.109.9 /Übersc hriften/Überschr iften 4/K-O/Nullst ellung @ 63\mod_1299835268 928_78.doc @ 576643
10.11.2.1 Zero position
Pos: 32.109.10 /BA/Ei nstellungen/Großpac kenpresse/Vari ables Füllsystem VFS/Ei nstellen des VFS-Syst ems Bild T1 HS Baureihe @ 63\ mod_1299825528742_78. doc @ 576315
Fig.153
Pos: 32.109.11 /BA/Ei nstellungen/Großpac kenpresse/Vari ables Füllsystem VFS/ Nullstellung @ 63\mod_129 9834497383_78.doc @ 576617
Turn the packer in the working direction manually by turning the flywheel until the roller (8)
snaps into the zero position (9). (The VF system is now in the zero position.)
Then:
• Adjust the setting screw (3) so that when the anvil (4) is lying flush, the middle of the
roller (5) B = 5 - 8 mm is lying on the trigger cam disc (6).
• In this position of the anvil (4), adjust the threaded spindle (2) until the feeler rocker (1)
maintains a distance of C = 5 - 10 mm from the edge of the packer tray.
Pos: 32.109.12 /BA/- ----Seitenumbruc h------ @ 0\mod_119617531 1226_0.doc @ 4165