KRUEGER SVE - Page 30

Form #: SIDOM.4 Page | 30 Revised: 03/19
Electric Heat and LineaHeat
Thermal cutout, automatic reset (115-130° Limit)
10052101
Thermal cutout, manual reset (160° Limit)
10118801
Disconnect Switch 40A Assembly (Does not include Snap-In Neutral Block)
31453101
Disconnect Switch 60A Assembly (Does not include Snap-In Neutral Block)
31453102
Disconnect Neutral Block - 40A (Snap-In)
10341201
Disconnect Neutral Block - 60A (Snap-In)
10341202
Magnetic Contactor, 30A, 24V coil, 1 pole (DIGITAL/ ANALOG)
10323601
Magnetic Contactor, 30A, 24V coil, 2 pole (DIGITAL/ ANALOG)
10054401
Magnetic Contactor, 60A, 24V coil, 2 pole (DIGITAL/ ANALOG)
10162501
Solid State Relay - 1 Pole, 50A (AC Volt)
15018001
EHM Board (including mounting bracket)
35134901
Solid State Relay - 1 Pole, 50A (DC Volt) [Crydom CWD 4850]
15012101
Heat Sink
15012001
Discharge Temperature Sensor
HH79NZ074
Water Coils
1 Row: Unit Size:
4-6
41410148
7-8
41410149
9-10
41410150
12
41410151
14
41410152
16
41410153
20
10344201
22
41410214
2 Row: Unit Size:
4-6
41410154
7-8
41410155
9-10
41410156
12
41410157
14
41410158
16
41410159
20
10344202
22
41410215
NOTE: 1 & 2 Row Coils can be used for both Left and Right Hand Orientation