EasyManua.ls Logo

Kruger KA300 - Cleaning & Maintenance

Kruger KA300
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
Wash enameled and stainless steel parts with lukewarm water and detergent.
Do not use abrasive products which might damage them.
Hot water with liquid soap can remove most stains easily. Always rinse the
surface with clean water and wipe dry with a soft clean cloth to prevent water
marks.
For tougher stains, use ordinary non-abrasive detergents or stainless steel
polishing powder with a little water.
For stubborn grimes and deposits, use a scouring pad or soft bristle brush
along with a stainless steel cleaner and water. Always rub in the direction of
the polished lines, or “grain” of the stainless steel nish. Avoid using too much
pressure as it may mar the surface. We strongly advise you against using acids
for cleaning.
Do not allow deposits to remain for long periods of time. Do not use ordinary
steel wool or steel brushes to clean the range hood.
Do not allow salt solutions, disinfectants, bleaches, or cleaning compounds
to remain in contact with the stainless steel surface for prolonged periods of
time. Many of these compounds contain chemicals that can be harmful to the
stainless steel nish. Always rinse with water after every cleaning and wipe dry
with a clean cloth.
General Cleaning
Before cleaning or servicing your appliance, disconnect it from the
electrical service panel and allow it to cool down.
!
CLEANING & MAINTENANCE
Stainless steel is one of the easiest materials to keep clean. Occasional care
will help preserve its ne appearance for years to come.