EasyManua.ls Logo

Krups Authentic Range XP381 - Page 8

Krups Authentic Range XP381
158 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
ENVIRONMENT

Your appliance contains valuable materials which can be recovered
or recycled.
Leave it at a local civic waste collection point.
PROBLEMS POSSIBLE CAUSES SOLUTIONS
The appliance does not
work.
The pump is disabled due
to a lack of water.
Fill the water tank and
restart the pump (refer to
the section: FIRST USE).
Avoid emptying the tank
completely.
The removable water tank
is incorrectly positioned.
Position the water tank
correctly.
The appliance is not
connected.
Ensure that the appliance
is switched on.
The nozzle does not work
or produces little foam.
The foam nozzle is not
correctly installed.
Check that the accessory
is correctly mounted on
the appliance: remove
then re-install it on the
hinged arm using a rm
upward movement.
The milk is too hot. Use fresh, pasteurised or
UHT milk that has been
recently opened.
The orange light is on and
espresso function does
not work.
The water boiler is too hot
for espresso after steam
function.
Cool down your machine
following the instructions
of “Good to Know” on
page 5.
If it is not possible to determine the cause of the fault, consult an approved retailer.
Never disassemble the appliance! (if the appliance is disassembled, this will void the
guarantee).

Table of Contents

Related product manuals