KRUPS Espresseria Automatic
26 Use and maintenance / SERIE EA 80xx
Caution: If the cleaning programme
is interrupted by a power cut or acciden-
tal unplugging of the machine, it must be
started again from the beginning. A new
cleaning tablet will be required in this
case. The programme must be started
again completely in order to rinse the
water circuit and eliminate any traces of
harmful cleaning products.
Once the cleaning cycle is finished, the
"clean" indicator light will flash again.
Empty the recipient and put it back under
the coffee tubes and steam nozzle.
Press the "Service" button.
The "clean" indicator light will remain lit
Info : The first rinsing cycle starts and
runs automatically. It allows the rest of the
cleaning product to be eliminated from inside
the appliance. This first cycle lasts around 5
minutes.
i
Once the first rinsing cycle is finished, the
"clean" indicator light will flash again.
Empty the recipient and put it back under
the coffee tubes and steam nozzle.
Press the "Service" button.
The "clean" indicator light will remain lit.
Info : The second rinsing cycle starts and
runs automatically. This second cycle lasts
around 5 minutes.
i
Once the second rinsing cycle is finished,
the "clean" indicator light will be extingui-
shed.
Remove the recipient and empty it.
Empty the drip tray and fill the water tank.
To Next Page
Loading...
Need help?
General
