KRUPS Espresseria Automatic
21Use and maintenance / SERIE EA 80xx
DEUTSCH
ENGLISH
FRANCAIS
NEDER
LAN
DS
DANSK
SVENSKA
NORSK
SUOMI
ITALIANO
4.4 Using the auto-cappuccino accessory (optional)
The XS 6000 auto-cappuccino
accessory facilitates the preparation of a
cappuccino or caffe latte (white coffee)
with your Automatic Espresseria. The
accessory includes a brushed stainless
steel milk jug, a riser tube and a
connector tube, and a special nozzle.
Insert the stainless steel tube into the rub-
ber seal of the milk jug. It should reach
down almost to the bottom of the jug.
Set the special nozzle as follows for each
drink:
Turn the central section 180° so that the
drink symbol chosen is at the front.
Fit the special nozzle:
A) remove the steam nozzle (25) and
B) replace it with the special nozzle.
Fill the milk jug with cold milk (6 – 10°C)..
Connect the special nozzle and the stain-
less steel tube using the connector tube.
Assembly and fitting of the auto-cappuccino accessory
Cappuccino Café Latte
To Next Page
Loading...
Need help?
General
