SETTINGS
4
Appliances are
pre-set in the factory
to 2, average
temperature.
C
onnect the appliance
t
o the mains power
s
upply but do not turn
i
t on.
L
ift the cup grid by
pressing on the back to
m
ake it tilt.
P
ress the ‘Service’ and
k
eys at the same
t
ime.
The ‘calc’ light will
come on.
Press the key as
many times as are
needed to select the
desired coffee temperature.
At each of these stages, you can memorise your settings by pressing the button when you have reached the setting you
want (the 4 lights flash 2 times) or carry on with the procedure. These settings will remain memorised even if the electrical
power is cut off. You can modify these settings at any time by repeating these operations.
Setting the automatic electrical power supply cut-off (auto-off)
The ‘clean’ light will
come on.
Press the key as
many times as are
needed to select the
desired duration.
Press the key as many
times as are needed to select
the hardness level for the
water used.
Setting the coffee temperature
Setting water hardness
Appliances are
pre-set in the factory
for hardness level 3.
Appliances are
pre-set in the factory
to 1 hour.
1
2
3
1 = 1 H
2 = 2 H
3 = 3 H
4 = 4 H
0 = very soft
1 = soft
2 = moderately hard
3 = hard
4 = very hard
T
he digital display for
p
arameter setting is
u
nder the servicing
f
lap.
It is possible to turn your
machine off automatically after
a number of pre-programmed
hours.
Press the steam key to switch
to automatic
cut-off setting =>
The “water tank” light
will come on.
Press the steam key to
switch to coffee
temperature setting =>
L
ook down vertically to
the bottom of the win-
d
ow
ENGLISH
To Next Page
Loading...
Need help?
General
