KRUPS SERIE EA9000
44
3
n Place a container with a capacity of at least 20 oz under the coffee
nozzles and press OK.
n The descaling phase will start.
4
n When the descaling is complete: Empty your container and put it
back, then empty the water tank, rinse it well and fill it again.
n The first rinsing will start.
5
n End of the first rinsing: Empty your container and replace it.
6
n End of the second rinsing and of the steam circuit descaling phase.
n The nozzle returns to its cleaning container.
n Refit the Claris Aqua Filter System filter, if necessary.
n Empty your recipient and fill the water tank.
Caution: During the descaling or coffee circuit cleaning programs, water can splash quite strongly. If
needed, place a paper towel on the drip tray.
!
To Next Page