ENG
MAINTENANCE, CLEANING, STORAGE
•Always unplug the toaster and let it cool before cleaning
or handling.
• To wipe the outside of the toaster, the cord and the warming
plate : use a soft cloth or a damp sponge and a mild dish
detergent. Dry thoroughly - (fig. 14).
• The warming plate is removable : Grip the metal warming
plate by the middle, gently pull until it becomes detached
and clean with water and a mild dish detergent then dry tho-
roughly - (fig. 15-16).
• If necessary warming plate can be put in the diswasher for
more thorough cleaning.
• To attach the warming plate, insert the 4 tabs on the warming
plate into the corresponding slots on the toaster and check
that it is correctly in place before each use - (fig. 17).
Never use toaster without the warming plate in place.
• To clean the crumb tray : pull out the tray completely and
discard the crumbs - (fig. 18).
• Do not put the crumb tray in the dishwasher.
• Do this regularly, after each use if possible (toasting or re-
heating).
• If crumbs or crusts remain inside the heating elements or in
toaster, remove the warming plate then turn the toaster upsi-
de down so that these remaining crumbs fall out. Replace the
crumb tray and the metal warming plate carefully.
Do not use any abrasive cleaning agents (no soda-based
scouring products, no scouring pads...), no metallic
utensils, metal scouring pads etc.
For appliance with a metallized finish* : Do not use any
cleaning products designed for metals. Use a soft cloth
with a window or glass cleaner.
• Always let your appliance cool down completely prior to sto-
ring especially in a tightly enclosed space, heat may damage
any type of flammable material.
• Do not wind the cord around the body of the appliance.
• After the appliance has cooled the power cord can be fed
bach into the base for storage. - (fig. 1).
To Next Page
Loading...
Need help?
General
