1
Rinse and clean water tank. Use a clean food-safe brush
and washing-up liquid as needed. Afterwards refill with
fresh drinking water and insert it into machine. The water
tank is not dishwasher proof!
2
Rinse drip tray and rinsing tool with fresh drinking water.
Clean drip tray with clean food-safe brush. The drip tray is
not dishwasher proof!
3
Clean with washing-up liquid and fresh drinking water both
sides of capsule holder. Alternatively wash in dishwasher.
Dry itafterwards. Clean the head of the machine around the
injector with a clean soft damp cloth.
4
Open locking handle. Put rinsing tool into capsule holder.
Insert capsule holder into machine. Close locking handle.
Place a large empty container underneath the coffee outlet.
5
Switch on machine. Power button starts blinking red while
machine is heating up for approximately 40 seconds.
Afterwards power button lights steady green. Machine is
ready to be used.
6
Push selection lever to the "HOT" position. Machine starts
rinsing.
7
After approx. 30 seconds push selection lever to the “STOP”
position. Remove and empty container. Warning: Hot water!
Handle with care!
8
Open locking handle. Pull out capsule holder. Remove
rinsing tool. Reinsert capsule holder. If any, remove water
from water tank.
9
Switch off machine. Unplug power plug!Clean machine with
a soft damp cloth. Dry it afterwards with a soft dry cloth.
7. CLEANING
13
To Next Page
Loading...
