28
1 See the Descale section on pages
18 to 21. If the start button turns
orange, the machine needs to be
descaled.
You should descale your machine
every 6 months.
TIP: connect your
machine and get an
automatic notification
when it is time to
descale.
The start button is steady orange
when the machine is ready or
dimming orange during an extraction.
The machine needs to be descaled!
1 Press the start button again for
15 seconds until it flashes orange.
The start button will then turn
steady green.
In case the descaling mode has been
activated by mistake, it’s possible to
stop it by pressing the start button
once. It turns steady orange.
ALERTS / TROUBLESHOOTING
To Next Page
Loading...
