10
■ Plug in at the mains socket, but leave the
appliance switched off.
■ Press the key for about 3 seconds (4).
Upon setting the switch-off period for the first
time, the factory setting of 5 hours will be shown
by the alternate blinking of the “fill water tank”;
“clean appliance” and the “empty coffee
grounds”; “remove lime-scale” indicators,
together with the glowing of the “rinse”, “1 cup
normal”, “1 cup strong”, “2 cups” and “coffee-
meal” indicators.
■ Set the switch-off period by pressing the
key the appropriate number of times (5).
The switch-off period which has been set will be
shown by the glowing of the “rinse”, “1 cup
normal”, “1 cup strong”, “2 cups” and “coffee-
meal” indicators.
Example: Switch-off period 3 hours.
Switch-off
OFF 1hour 3hours 5hours
period
appliance
indicators
■ Save the switch-off time in the memory by
pressing the key (6).
If no further switch-off period setting is made for
a period of 30 seconds, the various indicators will
cease to glow and the desired switch-off period
setting will have been recorded.
This memorised setting will remain unchanged
even if there is an electricity supply failure.
appliance
indicator(s)
alternate
blinking
glowing
4
5
6
To Next Page
Loading...
Need help?
General
