EasyManua.ls Logo

Krups XP 1020 - Making Espresso

Krups XP 1020
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English
8
Check that the appliance is unplugged and that there is no pressure.
(See CAUTION-PRESSURE)
I
Unscrew the boiler cap. Measure out the right amount of water for your
needs and pour it into the water tank. For instance: an espresso-sized
cup (small cup for strong coffee) = 1 to 2 oz (25 to 50 ml). A standard-
sized cup (for milder coffee) = 3 to 4 oz (75 to 100 ml). Up to 4 espres-
sos or 2 standard cups can be made at one time, without adding addi-
tional water to the tank.
I
Pour the water into the tank.
I
Screw the boiler cap.
I
Plug in the appliance.
I
Fit the filter into the filter-holder and rotate filter inside filter-holder to
secure it.
I
Put the coffee into the filter holder using the measuring spoon. 1 full measuring spoon is the
amount needed for 1 espresso. Using a tamper or the back of the measuring spoon tamp down
the coffee.
I
Remove any excess coffee on the edge of the filter-holder.
MAKING ESPRESSO
notice KRUPS XP1020-0828035.qxd:-0828035 18/04/08 14:58 Page 8

Related product manuals