KSB ITUR AU-100/30 - User Manual

Instructions Manual
MIF-2100/06-I [07-2008]
AU
Self-Priming Pumps
This manual contains important instructions and warnings.
You must read them before mounting, making the electrical
connections and starting up. You must also comply with the
instructions for the components related to this pump.
Please remember that this Manual must be kept close to the
motor pump group.

Summary

Safety

Marking of Warnings in Manual

Personnel Qualifications and Instruction

Specifies requirements for qualified and instructed personnel.

Risks of Failing to Comply with Safety Instructions

Details potential hazards resulting from non-compliance with safety rules.

Safety Instructions for Maintenance, Inspection and Assembly Work

Safety Instructions for Maintenance, Inspection and Assembly Work

Outlines safety measures for maintenance, inspection, and assembly tasks.

Warnings for Equipment with Marking Ex

Provides specific safety guidelines for equipment with ATEX marking.

Installation

Start-up

First Start-up

Steps for the initial start-up of the pump.

Filling (Priming) of the Pump

Detailed procedure for priming the pump before operation.

Maintenance;Conservation

General Instructions

Maintenance;Inspection

Procedures for regular maintenance and inspection.

Dismounting

Assembly

Preventative Maintenance

Trouble-shooting

The Pump Does Not Move the Fluid

Insufficient Pressure or Flow

Excessive Vibrations and Noise

Loss of Fluid Through the Mechanical Seal

KSB ITUR AU-100/30 Specifications

General

Type	Centrifugal Pump
Max Flow Rate	100 m³/h
Max Head	30 m
Speed	2900 rpm
Inlet Diameter	100 mm
Outlet Diameter	80 mm
Housing Material	Cast Iron
Application	Water Supply, Irrigation
Impeller Type	Closed