KSB ITUR AU-50/20 - User Manual

Instructions Manual
MIF-2100/06-I [07-2008]
AU
Self-Priming Pumps
This manual contains important instructions and warnings.
You must read them before mounting, making the electrical
connections and starting up. You must also comply with the
instructions for the components related to this pump.
Please remember that this Manual must be kept close to the
motor pump group.

Summary

Safety

Marking of Warnings in this Manual

Explains hazard symbols used in the manual.

Personnel Qualifications and Instruction

Details required qualifications and instruction for personnel.

Risks of Failing to Comply with the Safety Instructions

Outlines potential hazards from not following safety rules.

Conscientious Safety at Work

Emphasizes adherence to manual and workplace safety regulations.

Safety Instructions for Users and Service Personnel

Provides specific safety guidelines for operating and servicing the equipment.

Safety Instructions for Maintenance, Inspection and Assembly Work

Safety guidelines for maintenance, inspection, and assembly tasks.

Warnings for Equipment with Marking Ex

Specific warnings for equipment with ATEX marking.

Installation

Electrical Connection

Instructions for proper electrical connection of the pump and motor.

Start-Up

First Start-Up

Step-by-step guide for initial pump start-up, including priming and checks.

Maintenance;Conservation

General Instructions

Maintenance;Inspection

Preventative Maintenance

Trouble-shooting

KSB ITUR AU-50/20 Specifications

General

End suction pump	Yes
Speed	2900 rpm
Housing Material	Cast Iron
Seal Type	Mechanical Seal
Inlet Diameter	50 mm
Application	Water Supply, Irrigation, Industrial Applications