KSB ITUR AU-65/10 - User Manual

Instructions Manual
MIF-2100/06-I [07-2008]
AU
Self-Priming Pumps
This manual contains important instructions and warnings.
You must read them before mounting, making the electrical
connections and starting up. You must also comply with the
instructions for the components related to this pump.
Please remember that this Manual must be kept close to the
motor pump group.

Summary

Self-Priming Pumps

Safety

Safety Instructions for Maintenance, Inspection and Assembly Work

Outlines safety protocols for maintenance, inspection, and assembly tasks.

Personnel Qualifications and Instruction

Defines the required qualifications and training for personnel.

Risks of Failing to Comply with Safety Instructions

Details the potential hazards and liabilities from not following safety guidelines.

Unauthorised Operation Modes

Conscientious Safety at Work

Warnings for Equipment with Marking Ex

Provides guidance for equipment used in potentially explosive atmospheres (ATEX).

Safety Instructions for Users and Service Personnel

Provides specific safety measures for operators and maintenance staff.

Installation

Check before Assembly

Electrical connection

Details the procedures for safely connecting the pump's electrical components.

Group Positioning

Guidance on correctly positioning the pump unit during installation.

Motor connection

Steps for connecting the electric motor wiring correctly.

Levelling

Time relay adjustment

Pump-motor alignment

Details the importance and method of aligning the pump and motor shafts.

Rotation direction. Check

How to verify and correct the motor's rotation direction.

Start-Up

First start-up

Detailed steps for the initial start-up of the pump assembly.

Shutdown

Filling (priming) of the pump

Instructions on how to fill (prime) the pump with liquid before operation.

Switching frequency

Final control

Start-up

Steps for the actual commencement of pump operation.

Maximum pump speed

Maintenance;Conservation

General instructions

Oil chart

Mechanical seal

Instructions for reassembling the mechanical seal correctly.

Checking instructions

Specific checks to perform during the initial minutes of operation.

Emptying;Drainage

Pump

Procedures for reassembling the pump body and impeller.

Assembly

Preventative maintenance

A schedule of routine checks and maintenance tasks to ensure reliability.

In cases of mechanical seal

Dismounting

General instructions and precautions for dismantling the pump.

Tightening torque of the screws;nuts

Fundamental instructions;observations

Coupling

Tightening torque of the impeller nuts

Bearings

Lubrication

Information on the type of lubrication required for pump bearings.

Trouble-shooting

Trolley-mounted pumps

Warnings

Start-up

Safety

KSB ITUR AU-65/10 Specifications

General

Type	Centrifugal Pump
Discharge Size	65 mm
Speed	2900 rpm
Motor Power	15 kW
Inlet Diameter	80 mm
Outlet Diameter	65 mm
Operating Temperature	-10°C to +120°C
Housing Material	Cast Iron
Seal Type	Mechanical Seal
Application	Irrigation
Impeller Diameter	250 mm