INTRODUCTION
volo and volo-in are proximity readers that allow the user to manage the arming /disarming of the Ksenia
Security System and more in general the activation/deactivation of different scenarios programmed in terms
of Home Integration, by means of enabled mini-Tags (KSI7600000.000). They are connected to the 4-wires
KS-BUS and programmed directly from the Control Panel.
volo can be installed both outdoor (its plastic enclosure and the PCB protection treatment of full immersion
in epoxy resin allows the outdoor installation without additional protection) and indoor, directly onto the
wall (in vertical) or screwed onto the box DIN 503 (with an optional frame - KSI220001.3X0). From a
component point of view, volo has been developed with an innovative tamper protection (against wall
removal and opening): an accelerometer.
volo-in is an indoor proximity reader that can be installed on any type of switch plate normally designed for
light switches, it uses the slot of the standard adapter normally used for the RJ45 socket.
Both the devices are provided with 5 colors LED and each of them can be associated to a customizable
scenario; beside the light signal, volo-in is also provided with acoustic signals (a different tone each color) to
the performed operations, to compensate for a particular lighting conditions (e.g. over-exposure) as well as
to meet the needs of visually impaired users.
TECHNICAL DATA
• Supply voltage: 13.8Vcc
• volo consumption: 40mA
• volo-in consumption: 10mA
• Proximity reader technology RFID13.56 MHz
• volo dimensions: 127 x 43 x 17 mm
• volo-in dimensions: 46 x 19 x 44 mm
QUANTITY DATA
lares 4.0 models wls 96 16 40 40 wls 140 wls 644 wls
Maximum number of user
interfaces (volo, volo-in, ergo,
ergo S and ergo M)
3 6 24 24 40 64
volo
volo-in
Proximity readers
Installation guide
volo volo-in
KSI2200000.300 black
KSI2200000.310 white KSI2200002.300
code R30009.100en www.kseniasecurity.com
ed.04/2020
To Next Page
Need help?
General
