1.5 Charging
The Explorer smartwatch’s full charge time is approximately
4 hours, and the battery can last up to 8-9 days depending
on the usage.
Use the 80 cm USB-A cable with magnetic charging base
that is included in the box to charge the smartwatch.
Connect the USB-A connector to a charger, computer
output or power bank and place the magnetic base in a way
so that it properly sticks to the back part of the watch body.
1.6 Power on/off, factory reset and reboot
To turn on the smartwatch, long-press the dial button.
To turn off the smartwatch, factory reset or reboot, press and
hold the dial button for 3 seconds. A menu with the 3 options
will appear. Choose the one you prefer.
1.7 About IP protection rating
The Explorer smartwatch has a 5ATM protection rating.
Disclaimer: Although the watch has an 5ATM protection
rating, we do not recommend direct and prolonged contact
with water, or use in saunas or steam baths. We do not
recommend swimming in the sea or in swimming pools
(both fresh and salt water). In the event that this happens, it
is recommended that the watch be rinsed with fresh water
after immersion, due to the corrosive effect of chlorine or salt
water. If the watch has an auto-drain function, it is also
recommended to use it after rinsing.
2. Initial setup
2.1 Download the app
The Explorer smartwatch compatible app is Smart-Time Pro.
There are several ways to download it:
- Tap here to download the Smart-Time Pro app from Google
Play or App store.
- You can also download the app directly by typing “Smart-
Time Pro” in the Google Play or App Store search engine.
2.2 Register in the app
1. Access the app and accept its terms of use.
2. Select your region.
3. After that, the sign-up screen will appear. You can log in
with your Google account, with your Apple account, with
your own email or continue without logging in.
4. You will then access the Personal Information screen.
Fill all the requested data. Once you have filled all the info,
you are ready to go. Make sure to accept all the permissions
that the app requests to ensure optimal performance and
function usage
To Next Page
Loading...
