Need help?Do you have a question about the KTM 150 SX 2017 and is the answer not in the manual?
General| Bore x Stroke | 58 mm x 54.5 mm |
|---|---|
| Starter | Kickstarter |
| Transmission | 6-speed |
| Seat Height | 960 mm |
| Ground Clearance | 375 mm |
| Engine Type | 1-cylinder, 2-stroke |
| Displacement | 143.99 cm³ |
| Frame | Central tube frame made of chrome molybdenum steel tubing |
| Front Suspension | WP USD, 48 mm |
| Rear Suspension | WP shock absorber |
| Front Brake | Disc brake |
| Rear Brake | Disc brake Ø 220 mm |
| Fuel Tank Capacity | 7 liters |
| Fuel System | Carburetor |
| Dry Weight | 80.5 kg |
Outlines safe operation practices including rider fitness, ventilation, and component cooling.
Emphasizes wearing appropriate and well-maintained protective gear for rider safety.
Defines danger, warning, caution, and note levels with corresponding symbols for risk communication.
Describes the clutch lever's function and its automatic adjustment mechanism.
Explains the hand brake lever's function for engaging the front brake.
Identifies the throttle grip on the right handlebar for controlling engine speed.
Explains the operation of the fuel tap for SX and XC models, including ON, OFF, and RES positions.
Provides essential safety advice and pre-ride checks for new owners before initial use.
Outlines necessary preparations for riding in challenging conditions like sand or mud.
Details the procedure for starting the engine, including safety precautions for exhaust gases.
Explains proper gear shifting techniques and riding practices for optimal performance.
Provides guidance on effective braking techniques and potential hazards.
Lists mandatory maintenance tasks for SX models at specified operating hour intervals.
Lists mandatory maintenance tasks for XC models at specified operating hour intervals.
Guides on adjusting suspension settings based on rider weight for optimal handling.
Details how to adjust the air pressure in the fork for personalized suspension tuning.
Explains how to adjust the handlebar position for improved rider comfort and control.
Provides step-by-step instructions for safely removing the front fork legs.
Details the procedure for installing the rear shock absorber onto the motorcycle.
Guides on cleaning the air filter and its housing to maintain optimal engine performance.
Outlines the process for safely removing the motorcycle's fuel tank.
Details the procedure for checking the front brake fluid level and potential issues.
Guides on inspecting the front brake linings for wear and damage.
Outlines the process for checking the rear brake fluid level and identifying issues.
Explains how to inspect tires for wear, damage, and age according to manufacturer recommendations.
Provides instructions on checking tire pressure when tires are cold for optimal performance and safety.
Details the procedure for recharging the motorcycle battery and important precautions.
Guides on checking the coolant level and antifreeze protection for the engine's cooling system.
Explains how carburetor components affect performance and the need for tuning based on conditions.
Details the process of adjusting the engine's idle speed for stable idling and proper throttle response.
Explains how to check the gear oil level with the engine cold and what to look for.
Provides instructions for draining and refilling the engine's gear oil.
Lists detailed specifications for the motorcycle's engine across different models.
Provides technical data and tuning charts for the motorcycle's carburetor system.
Lists critical torque specifications for various chassis components, essential for safe assembly.
To Next Page
