Need help?Do you have a question about the KTM 250 SX 2017 and is the answer not in the manual?
General| Displacement | 249 cm³ |
|---|---|
| Bore x Stroke | 66.4 mm x 72 mm |
| Starter | Kickstarter |
| Transmission | 5-speed |
| Ground Clearance | 375 mm |
| Seat Height | 960 mm |
| Ignition | Kokusan |
| Front Tire | 80/100-21 |
| Rear Tire | 110/90-19 |
| Engine Type | 2-stroke |
| Frame | Central double-cradle type 25CrMo4 steel |
| Front Suspension | WP USD 48 mm |
| Rear Suspension | WP shock absorber with linkage |
| Front Brake | Disc brake |
| Rear Brake | Disc brake, 220 mm |
| Fuel Tank Capacity | 7.5 liters |
| Wheelbase | 1485 mm |
Defines the proper usage scenarios and limitations for the motorcycle.
Provides essential safety guidelines and precautions for operating the vehicle.
Details the different levels of risk and their associated warning symbols.
Covers crucial aspects for safe riding and vehicle handling.
Emphasizes the critical importance of wearing appropriate safety gear.
Stresses the necessity of reading and keeping the owner's manual accessible.
Details warranty coverage and requirements for maintaining it.
Highlights the necessity of regular servicing for optimal performance.
Offers initial guidance for operating the new motorcycle safely.
Provides essential recommendations for the engine break-in period.
Advises on preparations for challenging terrain and riding conditions.
Lists essential checks before each ride for safety and operational readiness.
Provides step-by-step instructions for safely starting the motorcycle's engine.
Guides on how to smoothly begin riding after starting the engine.
Details correct braking techniques and associated warnings.
Covers safe methods for stopping and parking the motorcycle.
Instructions on how to safely refuel the motorcycle.
Details required maintenance tasks for SX models at specified intervals.
Outlines required maintenance tasks for XC models at specified intervals.
Provides instructions on how to adjust the air pressure in the front forks.
Covers checking, cleaning, and adjusting the drive chain tension.
How to check free travel and adjust the position of the hand brake lever.
Steps for checking and adding front brake fluid.
How to check and change the front brake linings.
How to check free travel and adjust the position of the foot brake lever.
Steps for checking and adding rear brake fluid.
How to check and change the rear brake linings.
How to check antifreeze protection and coolant levels.
Steps to adjust the engine's idle speed for optimal performance.
How to check the gear oil level in the transmission.
Instructions for changing the engine's gear oil.
Covers common faults, their possible causes, and recommended actions.
To Next Page
