Need help?Do you have a question about the KTM 150 SX 2016 and is the answer not in the manual?
General| Bore x Stroke | 58 mm x 54.5 mm |
|---|---|
| Transmission | 6-speed |
| Final Drive | Chain |
| Rear Suspension | WP 5018 BAVP DCC Shock Absorber |
| Starter | Kickstarter |
| Engine Type | Single-cylinder, 2-stroke |
| Fuel Tank Capacity | 7.5 L (2.0 US gal) |
| Front Suspension | WP 48 mm |
| Front Brake | Disc, 260 mm |
| Rear Brake | 220 mm disc |
| Frame | Chromium-molybdenum |
Explains the meaning of specific symbols used in the document for clear communication.
Explains the typographical formats used for names, trademarks, and technical terms.
Detailed steps for unpacking the motorcycle and completing the initial setup process.
Instructions for safely lifting the motorcycle onto a stand for maintenance or inspection.
Step-by-step guide for correctly installing the front wheel, including brake alignment.
Procedure for recharging the battery on XC model motorcycles, including preparatory and main work.
Essential safety warnings and procedures for refueling the motorcycle with the correct fuel.
Crucial specifications for tightening torques of various chassis components for safety and performance.
Details on the recommended high-grade, fully synthetic 2-stroke engine oil for optimal performance.
Guidance on using unleaded fuel with a specific ethanol content and 2-stroke oil mixture ratio.
Information on the recommended long-life grease for maintenance, specifying brand and type.
Explanation of the JASO FD standard for 2-stroke engine oil, highlighting its racing application.
To Next Page
