EasyManua.ls Logo

KTM 350 SX-F 2016 User Manual

KTM 350 SX-F 2016
19 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
SETUP INSTRUCTIONS 2016
250 SX-F
250 XCF
Art. no. 3213443en
Question and Answer IconNeed help?

Do you have a question about the KTM 350 SX-F 2016 and is the answer not in the manual?

KTM 350 SX-F 2016 Specifications

General IconGeneral
Engine TypeSingle Cylinder, 4-Stroke
Displacement349.7 cc
Bore x Stroke88 mm x 57.5 mm
StarterElectric starter
Transmission5-speed
Fuel SystemKeihin EFI, throttle body 44 mm
IgnitionKeihin EMS
Rear SuspensionWP Suspension 5018 BAVP DCC
Ground Clearance370 mm
Seat Height960 mm
Front Wheel1.60 x 21"
Rear Wheel2.15 x 19"
Final DriveChain
Frame25CrMo4 steel central-tube frame
Front BrakeDisc brake, 260 mm
Rear BrakeDisc brake, 220 mm
Fuel Capacity7.0 liters

Summary

Means of Representation

Symbols Used in Manual

Explains the meaning of various symbols used within the setup instructions, such as confirmation, error, and information icons.

Typographical Formats Used

Details the use of proprietary names, protected names, trademarks, and underlined terms within the document.

Vehicle Setup Procedures

Unpacking and Initial Vehicle Setup

Covers the process of unpacking the motorcycle, removing protective materials, and preparing it for initial setup on a lift stand.

Work Procedures

Raising and Moving the Motorcycle

Instructions for safely raising the motorcycle using a lift stand and removing it from the stand.

Front Wheel Installation

Steps for installing the front wheel, including checking bearings, cleaning/greasing seals, and correct positioning.

Front Fender and Number Plate Installation

Details on mounting the front fender and installing the start number plate, including specific screws and torque values.

Seat and Footrest Installation

Procedures for removing and mounting the seat, and installing the footrests, ensuring correct pin and spring placement.

Battery Installation and Connection

Guidance on installing the battery, securing it with a bracket, and connecting positive and negative cables correctly.

Battery Recharging and Maintenance

Instructions on how to recharge the battery, including voltage checks, charging parameters, and regular maintenance tips.

Fuel Filler Cap Operations

Steps for safely opening and closing the fuel filler cap, including model-specific release mechanisms.

Vehicle Refueling Procedure

Detailed instructions on how to refuel the motorcycle, including safety precautions and fuel level measurement.

Technical Specifications

Chassis Tightening Torques

A comprehensive list of screws, nuts, and their required torque specifications for various chassis components.

Substances and Materials

Recommended Fuel Grade

Specifies the standard and classification for unleaded super fuel, including ethanol content guidelines and warnings.

Auxiliary Materials

Long-Life Grease Recommendation

Identifies the recommended supplier and product for long-life grease, specifically Motorex Bike Grease 2000.

Related product manuals