KTM 350 SX-F 2017 User Manual

OWNER'S MANUAL 2017
350 SX‑F
350 XC‑F
Art. no. 3213474en

KTM 350 SX-F 2017 Specifications

General

Brand	KTM
Model	350 SX-F 2017
Category	Motorcycle
Language	English

Summary

Means of Representation

Symbols Used

Explains the meaning of various symbols used in the manual for warnings and instructions.

Safety Advice

Use Definition - Intended Use

Defines intended use for SX-F and XC-F models, including operational restrictions and compliance.

Safety Advice

Emphasizes reading the manual and following safety instructions for safe vehicle operation.

Degrees of Risk and Symbols

Explains symbols used for Danger, Warning, Caution, and Note to indicate risk levels.

Tampering Warning

Safe Operation

Covers rider fitness, exhaust gases, hot components, and general safe operation practices.

Protective Clothing

Emphasizes wearing appropriate, well-maintained protective gear for riding.

Work Rules

Important Notes

Manufacturer and Implied Warranty

Outlines warranty void conditions and where to find more information.

Spare Parts, Accessories

Service

Highlights importance of proper service for operation and wear prevention.

View of Vehicle

View of Vehicle, Front Left (Example)

Displays a diagram of the motorcycle's front left view with labeled components.

View of Vehicle, Rear Right (Example)

Displays a diagram of the motorcycle's rear right view with labeled components.

Serial Numbers

Chassis Number

Shows the location of the chassis number stamped on the steering head.

Type Label

Shows the location of the type label fixed to the steering head.

Engine Number

Shows the location of the engine number on the engine's left side.

Controls

Clutch Lever

Identifies clutch lever on the left handlebar and its operation.

Hand Brake Lever

Identifies hand brake lever on the right handlebar and its function.

Throttle Grip

Identifies throttle grip on the right handlebar.

Kill Switch

Identifies kill switch on the left handlebar and its states.

Electric Starter Button

Identifies starter button on the right handlebar and its function.

Combination Switch

Overview of Indicator Lamps

Details FI warning lamp and low fuel warning lamp indicators.

Service Hour Counter

Opening the Filler Cap

Details how to open the fuel filler cap, including fire hazard warning.

Closing the Filler Cap

Cold Start Button

Idle Speed Adjusting Screw

Shift Lever

Foot Brake Lever

Preparing for Use

Advice on First Use

Covers rider fitness, protective clothing, tire patterns, riding style, passenger limits, brake use, and weight limits.

Running in the Engine

Advises on engine speed and performance limits during the break-in period.

Starting Power of Lithium-Ion Batteries at Low Temperatures

Preparing the Vehicle for Difficult Riding Conditions

Preparing for Rides on Dry Sand

Preparing for Rides on Wet Sand

Preparing for Rides on Wet and Muddy Surfaces

Preparing for Rides at High Temperature and Slow Speed

Preparing for Rides at Low Temperature and in Snow

Riding Instructions

Checks and Maintenance Work When Preparing for Use

Lists pre-ride checks including fluid levels, brakes, tires, and controls.

Starting

Details starting procedures, including safety warnings and cold start button use.

Starting Off

Shifting, Riding

Covers gear shifting, throttle control, and clutch slipping.

Applying the Brakes

Discusses brake application, potential issues, and techniques for different conditions.

Stopping, Parking

Refueling

Details safe refueling procedures, fuel type, and tank capacity.

Service Schedule

Required Work

Details specific maintenance tasks required at different operating hour intervals.

Recommended Work

Tuning the Chassis

Checking the Basic Chassis Setting with the Rider's Weight

Explains how rider weight affects chassis setup and adjustment.

Compression Damping of the Shock Absorber

Adjusting the Low-Speed Compression Damping of the Shock Absorber

Details how to adjust low-speed compression damping on the shock absorber.

Adjusting the High-Speed Compression Damping of the Shock Absorber

Details how to adjust high-speed compression damping on the shock absorber.

Adjusting the Rebound Damping of the Shock Absorber

Details how to adjust rebound damping on the shock absorber.

Measuring Rear Wheel Sag Unloaded

Checking the Static Sag of the Shock Absorber

Checking the Riding Sag of the Shock Absorber

Adjusting the Spring Preload of the Shock Absorber

Details how to adjust the shock absorber's spring preload.

Adjusting the Riding Sag

Adjusting the Fork Air Pressure

Details how to adjust air pressure in the fork legs for optimal handling.

Adjusting the Compression Damping of the Fork

Details how to adjust compression damping on the fork legs.

Adjusting the Rebound Damping of the Fork

Details how to adjust rebound damping on the fork legs.

Adjusting the Handlebar Position

Service Work on the Chassis

Raising the Motorcycle with a Lift Stand

Removing the Motorcycle from the Lift Stand

Bleeding the Fork Legs

Cleaning the Dust Boots of the Fork Legs

Removing the Fork Legs

Installing the Fork Legs

Removing the Lower Triple Clamp

Installing the Lower Triple Clamp

Checking the Steering Head Bearing Play

Adjusting the Steering Head Bearing Play

Greasing the Steering Head Bearing

Removing the Shock Absorber

Installing the Shock Absorber

Removing the Air Filter Box Cover

Installing the Air Filter Box Cover

Removing the Air Filter

Details removing the air filter. Warns against running engine without it.

Cleaning the Air Filter and Air Filter Box

Details cleaning the air filter and box. Warns against using fuel.

Installing the Air Filter

Details installing the air filter, ensuring correct seating.

Removing the Main Silencer

Installing the Main Silencer

Removing the Fuel Tank

Installing the Fuel Tank

Checking for Chain Dirt Accumulation

Cleaning the Chain

Checking the Chain Tension

Explains how to check and set the chain tension correctly.

Checking the Chain, Rear Sprocket, Engine Sprocket, and Chain Guide

Checking the Frame

Checking the Swingarm

Adjusting the Basic Position of the Clutch Lever

Checking/Correcting the Fluid Level of the Hydraulic Clutch

Changing the Hydraulic Clutch Fluid

Brake System

Checking the Free Travel of the Hand Brake Lever

Explains how to check free travel of the hand brake lever.

Adjusting the Basic Position of the Hand Brake Lever

Checking the Brake Discs

Details checking brake disc thickness and for damage.

Checking the Brake Fluid Level of the Front Brake

Explains how to check front brake fluid level.

Adding Front Brake Fluid

Details adding front brake fluid, including warnings.

Checking the Front Brake Linings

Explains how to check front brake lining thickness and for damage.

Changing the Front Brake Linings

Details changing front brake linings, including fluid level check and caliper piston retraction.

Checking the Free Travel of Foot Brake Lever

Explains how to check free travel of the foot brake lever.

Adjusting the Basic Position of the Foot Brake Lever

Checking the Rear Brake Fluid Level

Explains how to check rear brake fluid level.

Adding Rear Brake Fluid

Details adding rear brake fluid, including warnings.

Checking the Rear Brake Linings

Explains how to check rear brake lining thickness and for damage.

Changing the Rear Brake Linings

Details changing rear brake linings.

Wheels, Tires

Removing the Front Wheel

Installing the Front Wheel

Removing the Rear Wheel

Installing the Rear Wheel

Checking the Tire Condition

Checking the Tire Air Pressure

Details checking tire air pressure, especially when cold.

Checking Spoke Tension

Electrical System

Removing the Battery

Installing the Battery

Recharging the Battery

Changing the Main Fuse

Cooling System

Checking the Antifreeze and Coolant Level

Details checking coolant and antifreeze levels.

Checking the Coolant Level

Explains checking the coolant level in the radiator.

Draining the Coolant

Refilling Coolant

Tuning the Engine

Checking the Play in the Throttle Cable

Adjusting the Play in the Throttle Cable

Setting the Characteristic Map of the Throttle Response

Changing the Mapping

Adjusting the Idle Speed

Teaching the Throttle Valve Position

Checking the Basic Position of the Shift Lever

Adjusting the Basic Position of the Shift Lever

Service Work on the Engine

Changing the Fuel Screen

Checking the Engine Oil Level

Explains how to check engine oil level when cold and warm.

Changing the Engine Oil and Oil Filter, Cleaning the Oil Screen

Details changing engine oil, filter, and cleaning the oil screen.

Adding Engine Oil

Troubleshooting

Technical Data

Engine

Lists engine design, displacement, bore, stroke, compression, and lubrication details.

Engine Tightening Torques

Provides torque specifications for various engine components and fasteners.

Capacities

Lists capacities for engine oil, coolant, and fuel tank.

Fork

Shock Absorber

Chassis Tightening Torques

Provides torque specifications for various chassis components and fasteners.

Substances

Brake Fluid DOT 4 / DOT 5.1

Coolant

Engine Oil (SAE 10W/60) (00062010035)

Engine Oil (SAE 10W/50)

Fork Oil (SAE 4) (48601166S1)

Shock Absorber Fluid (SAE 2.5) (50180751S1)

Super Unleaded (ROZ 95/RON 95/PON 91)