What to do if the malfunction indicator lamp lights up on my KTM 350 SX-F 2023 Motorcycle?
If the malfunction indicator lamp lights up or flashes on your KTM Motorcycle, it could be due to a malfunction in the electronic fuel injection. You should check the wiring for any signs of damage and inspect the electrical plug-in connections for corrosion or damage. Also, use the KTM diagnostics tool to read the fault memory.
Why does my KTM Motorcycle have high oil consumption?
High oil consumption in your KTM Motorcycle can stem from several causes: * A bent engine vent hose: Ensure the vent hose is properly routed without any bends, and replace it if needed. * Engine oil level too high: Make sure to check the engine oil level. * Engine oil too thin: Replace the engine oil and oil filter, and remember to clean the oil screen. * Worn piston or cylinder: Measure the piston/cylinder mounting clearance.
General| Engine Type | Single Cylinder, 4-Stroke |
|---|---|
| Displacement | 349.7 cm³ |
| Bore x Stroke | 88 mm x 57.5 mm |
| Compression Ratio | 14.4:1 |
| Starter | Electric starter |
| Transmission | 5-speed |
| Fuel System | Keihin EFI, throttle body 44 mm |
| Cooling | Liquid cooled |
| Front Suspension | WP XACT-USD, Ø 48 mm |
| Rear Suspension | WP XACT Monoshock with linkage |
| ABS | No |
| Front Wheel | 1.60 x 21" |
| Rear Wheel | 2.15 x 19" |
| Front Wheel Travel | 310 mm |
| Rear Wheel Travel | 300 mm |
| Ground Clearance | 370 mm |
| Frame | Central double-cradle-type 25CrMo4 steel |
| Front Brake | 260 mm disc brake |
| Rear Brake | 220 mm disc brake |
| Wheelbase | 1, 485 mm |
Provides crucial safety advice, degrees of risk, and symbol definitions.
Covers safe operation practices and the importance of protective clothing.
Provides essential advice, safety warnings, and pre-ride checks for first use.
Lists essential pre-ride checks and safe vehicle starting instructions.
Provides guidance on shifting gears, riding, applying brakes, and stopping.
Details safe motorcycle transport and proper refueling procedures.
Lists comprehensive scheduled maintenance tasks with intervals.
Details low-speed and high-speed compression, and rebound damping adjustments.
Guides on checking static and riding sag, and adjusting spring preload.
Explains fork settings, air suspension, and adjusting fork air pressure.
Guides on checking and adjusting steering head bearing play.
Covers removing/installing shock absorber and chain maintenance procedures.
Details checking brake discs for wear and linings for thickness and damage.
Covers checking and adding front/rear brake fluid and changing linings.
Provides instructions for checking antifreeze and coolant levels with safety warnings.
Covers changing the fuel screen and checking/adding engine oil.
Lists common faults, their possible causes, and recommended actions.
Provides a list of blink codes for malfunction indicator lamp errors.
To Next Page
