Need help?Do you have a question about the KTM 2001 50 JR ADVENTURE and is the answer not in the manual?
General| Brand | KTM |
|---|---|
| Model | 2001 50 JR ADVENTURE |
| Category | Motorcycle |
| Language | English |
Section for recording motorcycle serial numbers.
Explains manual's content and general safety points.
Mandates appropriate protective gear for rider and supervisor.
Guidance on teaching and vehicle checks before riding.
Assesses physical readiness and gradual skill progression.
Stresses constant supervision and responsible riding.
Location of the chassis identification number.
Location of the engine identification number.
Controls engine speed and vehicle acceleration.
Lever for operating the front wheel brake.
Mechanism to turn off the engine.
Lever for operating the rear wheel brake.
Procedures for opening the cap and refueling safely.
How to turn the fuel supply on and off.
Using the choke for cold engine starts.
Method for starting the engine with the kickstarter.
Essential safety and operational checks before riding.
Guidance for the first riding experience.
Procedure for starting a cold engine.
Procedure for starting a warm engine.
Steps to take if the engine is flooded.
Techniques for moving off and controlling the motorcycle.
How to brake and stop the motorcycle safely.
Regular checks and maintenance for the engine.
Regular checks for chassis and brakes.
Regular checks for wheels and tires.
Important maintenance procedures to follow.
Checking and adjusting the steering head bearing.
Cleaning fork dust seals.
Routine maintenance for the telescopic fork.
Procedure for changing the telescopic fork oil.
How to check and adjust chain tension.
Maintenance for chain longevity.
Adjusting the front wheel brake cable.
Checking wear on front brake linings.
Adjusting the rear wheel brake cable.
Checking wear on rear brake linings.
Simple maintenance for drum brakes.
Steps for fitting and removing the front wheel.
Steps for fitting and removing the rear wheel.
Importance of checking tires for safety.
Checking spoke tension for wheel integrity.
How to remove and re-mount the seat.
Cleaning the air filter for engine protection.
Adjusting the throttle cable for proper response.
Adjusting the engine's idle speed.
Checking the transmission oil level.
Steps for changing the motorcycle's gear oil.
Adjusting seat height for rider comfort.
Key engine design and performance details.
Standard settings for the carburetor.
Torque values for engine fasteners.
Specifications for frame, fork, and suspension.
Details on brake systems and wheels.
Torque values for chassis fasteners.
To Next Page