Need help?Do you have a question about the KTM 50 MINI ADVENTURE 2000 and is the answer not in the manual?
General| Displacement | 49 cc |
|---|---|
| Seat Height | 560 mm |
| Weight | 40 kg |
| Cooling | Air cooled |
| Front Suspension | Telescopic fork |
| Front Brake | Drum |
| Rear Brake | Drum |
| Engine Type | Single-cylinder, 2-stroke |
| Transmission | Automatic |
| Bore x Stroke | 39.5 mm x 40 mm |
General introduction to the owner's manual and its contents.
Emphasis on adult supervision, child safety, and responsible riding.
Promoting safe, responsible, and eco-friendly motorcycling use.
Details on suitability for different age/weight categories.
Mandatory safety equipment and initial rider instruction.
Speed limits, terrain, adult supervision, and no passengers.
Location and recording of the chassis identification number.
Location, recording, and model identification of the engine.
Description and function of handlebar controls.
Short circuit button, filler cap, and refueling safety.
Location and use of fuel tap and cold start choke.
Description and safety warning for using the kickstarter.
Essential inspection checklist before each start.
Instructions for new riders and initial familiarization.
Step-by-step procedure for cold engine starts.
Procedure for starting a warm engine.
Steps to resolve engine flooding issues.
Procedures for moving, operating, and stopping the motorcycle.
Summary of service intervals for various components.
Key maintenance tasks requiring special attention or order.
Essential care procedures for regular users.
Checking and adjusting play in the steering head bearing.
Method for cleaning fork dust seals.
Service procedures for the front telescopic fork.
Procedure for changing fork oil for specific models.
Procedure for checking and correcting chain slack.
General guidance on chain upkeep, lubrication, and wear.
Procedure for adjusting front and rear brake lever free play.
Inspection method for front and rear brake pad wear.
Basic maintenance for drum brakes.
Steps for detaching and reattaching front and rear wheels.
Importance of tire condition and correct inflation for safety.
Importance of spoke tension for wheel stability and safety.
Steps for removing the motorcycle seat.
Procedure for cleaning and maintaining the air filter element.
Procedure for adjusting throttle cable free play.
Procedures for setting idle speed on different carburetors.
Procedure for verifying transmission oil level.
Steps for draining and refilling transmission oil.
Method to adjust seat height by changing mounting points.
Detailed technical data for engine models S5-E and S5-GS.
Standard settings for different carburetor types.
Specified torque values for engine components.
Detailed technical data for chassis components by model.
Standard adjustment parameters for front fork.
Specified torque values for chassis components.
To Next Page