Need help?Do you have a question about the KTM 2007 SMR 450 and is the answer not in the manual?
General| Engine Type | Single cylinder, 4-stroke |
|---|---|
| Displacement | 449.3 cc |
| Bore x Stroke | 95 mm x 63.4 mm |
| Compression Ratio | 12.5:1 |
| Transmission | 6-speed |
| Ignition | Kokusan digital |
| Front Suspension | WP USD 48 mm |
| Rear Suspension | WP Monoshock |
| Fuel System | Keihin FCR-MX 41 |
| Front Brake | Single 260 mm disc |
| Rear Brake | Single 220 mm disc |
| Seat Height | 925 mm |
| Dry Weight | 108 kg |
| Fuel Capacity | 7.5 l |
| Wheelbase | 1485 mm |
| Frame | Chromium molybdenum steel |
| Power | Approx. 39.7 kW / 54 hp |
| Starter | Kick |
Adjusts the position of the pressure point on the hand brake lever using an adjusting screw.
Procedure for removing and replacing front brake pads, cleaning the caliper, and reassembling.
Specifies standard settings for fork compression, rebound, preload, spring, and air chamber length.
Specifies standard settings for shock absorber compression, rebound, and spring preload.
Details standard settings for jets, needle position, mixture control, and other carburetor adjustments.
To Next Page
