Need help?Do you have a question about the KTM 250 EXC-F 2018 and is the answer not in the manual?
General| Displacement | 249.91 cm³ |
|---|---|
| Bore x Stroke | 78 mm x 52.3 mm |
| Starter | Electric starter |
| Transmission | 6-speed |
| Cooling | Liquid cooled |
| Rear Suspension | WP Xplor PDS shock absorber |
| Ground Clearance | 370 mm |
| Seat Height | 960 mm |
| Compression Ratio | 12.8:1 |
| Ignition | Kokusan |
| ABS | No |
| Engine Type | Single cylinder, 4-stroke |
| Front Suspension | WP Xplor 48 |
| Front Brake | Disc brake |
| Rear Brake | Disc brake |
| Clutch | Wet multi-disc clutch, hydraulically operated |
| Wheelbase | 1482 mm |
| Front Wheel | 21" |
| Rear Wheel | 18" |
| Fuel System | Keihin EFI, throttle body 42 mm |
| Frame | Central double-cradle-type 25CrMo4 steel |
| Front Tire | 90/90-21 |
Explains the meaning of various symbols used in the manual.
Explains typographical formats like proprietary names and brands.
Details the initial steps for unpacking and preparing the motorcycle.
Instructions for detaching and removing the headlight mask assembly.
Step-by-step guide for correctly installing the front wheel.
Procedures for safely disconnecting and removing the vehicle's battery.
Procedures for safely connecting and installing the vehicle's battery.
Guidelines and safety precautions for recharging the motorcycle battery.
Steps for safely installing the fuel tank.
Instructions and safety warnings for refueling the motorcycle.
Guide to setting the digital clock on the combination instrument.
Specifies torque values for various screws and bolts on the chassis.
To Next Page