Need help?Do you have a question about the KTM 250 EXC-F 2023 and is the answer not in the manual?
General| Engine | Single-cylinder, 4-stroke |
|---|---|
| Displacement | 249.9 cc |
| Bore x Stroke | 78 mm x 52.3 mm |
| Starter | Electric starter |
| Transmission | 6-speed |
| Cooling | Liquid cooled |
| Front Suspension | WP XPLOR-USD, Ø 48 mm |
| ABS | No |
| Seat Height | 960 mm |
| Ground Clearance | 370 mm |
| Fuel System | Electronic Fuel Injection |
| Front Brake | Disc brake, Ø 260 mm |
| Rear Brake | Disc brake, 220 mm |
| Fuel Tank Capacity | 9 liters |
| Frame | Central tube frame made of chrome molybdenum steel tubing |
| Rear Suspension | WP XPLOR shock absorber |
Provides essential safety guidelines and highlights the importance of reading them.
Explains different risk categories and their corresponding warning symbols.
Warns against tampering and outlines general rules for safe vehicle operation.
Emphasizes the critical importance of wearing appropriate protective clothing.
Highlights the impact of regular service on performance and longevity.
Explains the function and states of the stop and horn buttons.
Describes the function of the emergency OFF and start buttons.
Explains the meaning of various indicator lamps and warning lights.
Provides instructions for opening and closing the fuel tank filler cap.
Provides essential advice and warnings before the motorcycle's first use.
Explains the correct procedure and guidelines for running in the engine.
Lists essential pre-ride checks and instructions for starting the vehicle.
Explains traction control activation and basic shifting/riding advice.
Details proper braking techniques and safe stopping/parking methods.
Provides instructions for transporting and safe refueling practices.
Lists essential maintenance tasks and their recommended intervals.
Explains how to check and adjust the free travel of the hand brake lever.
Provides instructions for inspecting brake discs for wear and damage.
Guides on checking and topping up front and rear brake fluid levels.
Details inspection and replacement procedures for brake linings.
Instructions for checking tire condition, tread depth, and pressure.
Explains how to identify and replace fuses for electrical components.
Explains how to check antifreeze protection and coolant levels.
Procedure for checking engine oil level and changing oil/filter.
Instructions for adding engine oil if the level is low.
Lists causes and solutions for engine starting and running problems.
Addresses causes for low power, poor acceleration, and overheating.
Lists blink codes displayed by the malfunction indicator lamp.
Lists torque specifications for engine and chassis components.
To Next Page