B
brittany43Aug 14, 2025
What to do if my KTM Motorcycle engine turns over but doesn't start?
- LLarry KellyAug 14, 2025
If your KTM Motorcycle engine turns over but doesn't start, possible causes include an operating error (ensure you're following the correct start procedure), a disconnected quick release coupling (join it), a blown fuse 1 or fuse 4 (replace the fuse), an incorrectly set idle speed (adjust it), a spark plug that is oily or wet (clean and dry it, or replace it if necessary), a spark plug gap that is too wide (adjust the plug gap to 1.0 mm (0.039 in)). Also, the ignition system may be defective (check it), there may be a short-circuit cable in the wiring harness, or an error in the electronic fuel injection.