Need help?Do you have a question about the KTM 250 EXC-F Six Days EU 2018 and is the answer not in the manual?
General| Displacement | 249.91 cm³ |
|---|---|
| Bore x Stroke | 78 mm x 52.3 mm |
| Transmission | 6-speed |
| Rear Suspension | WP Xplor PDS shock absorber |
| Front Brake | Disc brake, 260 mm |
| Rear Brake | Disc brake, 220 mm |
| Front Tire | 90/90-21 |
| Seat Height | 960 mm |
| Starter | Electric starter |
| ABS | No |
| Engine Type | Single cylinder, 4-stroke |
| Fuel System | Electronic fuel injection (EFI) |
| Cooling System | Liquid cooling |
| Clutch | Wet multi-disc clutch |
| Front Suspension | WP XPLOR 48 |
| Wheelbase | 1485 mm |
| Rear Tire | 140/80-18 |
Defines intended use, authorized operation, and consequences of misuse.
Provides essential safety instructions for operating the vehicle correctly.
Provides crucial safety advice and pre-ride checks before initial use.
Lists essential checks before riding and safe starting procedures.
Details safe braking techniques and stopping/parking guidelines.
Lists essential maintenance tasks based on operating hours and intervals.
Explains how to set basic suspension based on rider weight.
Details adjusting compression (high/low speed) and rebound damping.
Covers measuring and adjusting rear shock absorber sag and spring preload.
Details checking and adjusting front fork compression and rebound damping.
Covers removal and installation procedures for the front fork legs.
Details removal and installation of the lower triple clamp for various models.
Explains how to check for play in the steering head bearings.
Details adjusting steering head bearing play for different models.
Covers air filter box cover and filter removal, installation, and cleaning.
Details procedures for removing and installing the rear shock absorber.
Details the procedure for removing the fuel tank.
Details the procedure for installing the fuel tank.
Details the procedure for cleaning the drive chain.
Explains how to check the drive chain tension for proper function.
Explains how to check wear on chain, sprockets, and chain guide.
Details the procedure for changing the hydraulic clutch fluid.
Explains how to check and correct the hydraulic clutch fluid level.
Covers checking and adjusting the free travel of the front brake lever.
Explains how to check the condition and wear limits of brake discs.
Explains how to check the front brake fluid level and identify issues.
Explains how to check the wear of the front brake linings.
Details the procedure for safely adding front brake fluid.
Details the procedure for changing the front brake linings.
Details the procedure for safely adding rear brake fluid.
Explains how to check the free travel of the rear brake lever.
Explains how to check the rear brake fluid level.
Explains changing engine response via guide plates on the throttle grip.
Details how to change engine mapping modes on the Six Days model.
Details the procedure for changing engine oil, filter, and cleaning the oil screen.
Lists causes and actions for engine starting failures.
Lists causes and actions for lack of engine acceleration or power.
Covers causes and actions for engine overheating and warning lamps.
Explains various blink codes for the malfunction indicator lamp.
To Next Page