KTM 250 EXC TPI 2019 User Manual

OWNER'S MANUAL 2019
250 EXC TPI
250 EXC Six Days TPI
250 XC‑W TPI
300 EXC TPI
300 EXC Six Days TPI
300 XC-W TPI
300 XC-W Six Days TPI
Art. no. 3213853en

KTM 250 EXC TPI 2019 Specifications

General

Displacement	249 cc
Bore x Stroke	66.4 x 72 mm
Transmission	6-speed
Seat Height	960 mm
Front Suspension	WP Xplor 48 upside-down fork
Starter	Electric starter
Ground Clearance	370 mm
Engine Type	2-stroke, single cylinder
Fuel System	Electronic Fuel Injection
Fuel Tank Capacity	9 liters
Cooling System	Liquid-cooled
Rear Suspension	WP Xplor PDS
Front Brake	Disc brake
Rear Brake	220 mm disc
Frame	Central double-cradle type in chrome molybdenum steel

Summary

Safety Advice

Use Definition - Intended Use

Defines the intended use for EXC and XC-W models.

Safe Operation

Details safe operation, including dangers of accidents and poisoning.

Protective Clothing

Emphasizes the importance of protective clothing for safety.

Serial Numbers

Chassis Number

Shows the location of the chassis number.

Engine Number

Shows the location of the engine number.

Controls

Kill Switch (All EXC Models)

Identifies and explains the kill switch function.

Indicator Lamps Overview (All EXC Models)

Explains indicator lamps for EXC models.

Locking the Steering (All EXC Models)

Preparing for Use

Advice on First Use

Provides crucial advice for the initial use of the motorcycle.

Running in the Engine

Details the engine break-in procedure and guidelines.

Riding Instructions

Checks and Maintenance Measures When Preparing for Use

Lists pre-ride checks and maintenance.

Braking

Instructions and warnings related to braking.

Refueling

Instructions and safety precautions for refueling.

Service Schedule

Required Work

Tuning the Chassis

Checking the Basic Chassis Setting with the Rider's Weight

Adjusting the Spring Preload of the Shock Absorber

Adjusting the Compression Damping of the Fork

Service Work on the Chassis

Bleeding the Fork Legs

Checking the Play of the Steering Head Bearing

Changing the Hydraulic Clutch Fluid

Brake System

Checking the Front Brake Fluid Level

Checking the Brake Discs

Changing the Rear Brake Linings

Wheels, Tires

Removing the Front Wheel

Checking the Tire Air Pressure

Electrical System

Removing the Battery

Changing the Main Fuse

Cooling System

Checking the Antifreeze and Coolant Level

Refilling with Coolant

Tuning the Engine

Adjusting the Idle Speed

Service Work on the Engine

Checking 2-Stroke Oil Level

Checking the Gear Oil Level

Troubleshooting

The Engine Cannot Be Cranked (Electric Starter)

Troubleshooting for engine not cranking.

Engine Overheats

Troubleshooting for engine overheating.

Malfunction Indicator Lamp Lights Up or Flashes

Technical Data

Engine

Engine Tightening Torques

Torque specifications for engine components.

Chassis Tightening Torques

Torque values for chassis components.

List of Symbols

Red Symbols

Yellow and Orange Symbols