Why is the time not correctly displayed on my KTM Motorcycle?
- LleemarySep 12, 2025
If the time isn't correctly displayed on your KTM Motorcycle, Fuse 8 might be blown, and you should replace it.
Why is the time not correctly displayed on my KTM Motorcycle?
If the time isn't correctly displayed on your KTM Motorcycle, Fuse 8 might be blown, and you should replace it.
Engine Type | Single cylinder, 4-stroke |
---|---|
Displacement | 373.2 cc |
Transmission | 6-speed |
Cooling System | Liquid cooled |
Front Suspension | WP upside-down Ø 43 mm |
Rear Suspension | WP monoshock |
Seat Height | 800 mm |
Dry Weight | 149 kg |
Bore x Stroke | 89 mm x 60 mm |
Compression Ratio | 12.6:1 |
Frame | Steel trellis frame, powder coated |
Front Tire | 110/70 ZR 17 |
Rear Tire | 150/60 ZR 17 |
Ground Clearance | 170 mm |
Torque | 35 Nm |
Fuel System | Electronic Fuel Injection |
Front Brake | 300 mm disc |
Rear Brake | 230 mm disc |
ABS | Bosch 9MB Two Channel ABS |
Fuel Tank Capacity | 11 liters |
General advice for safe operation and warning labels.
Explains risk levels and associated symbols.
Provides crucial safety guidelines for operating the vehicle.
Emphasizes the importance of wearing protective gear.
Highlights the importance of proper service and intervals for longevity.
Describes the location and function of the clutch lever.
Describes the location and function of the front brake lever.
Describes the location and function of the throttle grip.
Explains the location and operation of the light switch.
Details the location and operation of the turn signal switch.
Explains the location and function of the emergency OFF switch.
Describes the location and operation of the electric starter button.
Explains the location and states of the ignition and steering lock.
Provides instructions on how to lock the motorcycle's steering.
Provides instructions on how to unlock the motorcycle's steering.
Overview of the instrument cluster components.
Identifies the main components of the combination instrument display.
Details warning messages for high coolant, side stand, low battery.
Explains how to use the MODE, SET, and ABS buttons.
Explains the meaning of various indicator lights on the instrument cluster.
Details the various segments of the combination instrument display.
Explains the fuel level indicator bar graph.
Explains the coolant temperature display bars and warnings.
Explains how warning notes appear in the info display.
Provides instructions and safety warnings for opening the fuel filler cap.
Describes the location of the shift lever on the engine.
Describes the location and function of the foot brake lever.
Explains the location and use of the side stand, and its relation to the safety system.
Offers initial safety advice including driving impairment, clothing, tires.
Provides guidelines for the engine break-in period, including speed limits.
Warns about unstable handling due to improper loading and weight limits.
Lists pre-ride checks for roadworthiness and safety.
Provides safety warnings and steps for starting the motorcycle engine.
Explains the procedure for moving off from a stationary position.
Covers general riding advice, load alterations, and downshifting hazards.
Gives warnings and guidance on effective and safe braking techniques.
Provides instructions and warnings for safely stopping and parking the motorcycle.
Provides safety warnings and instructions for refueling the motorcycle.
Lists routine maintenance tasks and their recommended intervals.
Detailed procedure for cleaning the drive chain, with warnings.
Instructions for checking and ensuring correct chain tension.
Step-by-step guide to adjust the drive chain tension.
How to inspect wear on chain and sprockets.
Explains the ABS unit, sensors, and its safety function.
How to check brake disc thickness and wear limits.
How to check front brake fluid level and warnings.
Instructions and safety precautions for adding front brake fluid.
How to check front brake lining minimum thickness and damage.
Explains how to check free travel and potential failure.
Provides steps to adjust the foot brake lever's free travel.