16 COOLING SYSTEM
204
F00870-11
–
Loosen bleeder screw
3
.
Guideline
3 turns
– Tilt the vehicle slightly to the right.
– Pour in the coolant until it emerges without bubbles at the
bleeder screw, and then mount and tighten the bleeder screw
immediately.
Coolant ( p. 245)
– Completely fill the radiator with coolant. Mount the radiator
cap.
– Rest the vehicle on the side stand.
Danger
Danger of poisoning Exhaust gases are toxic and inhal-
ing them may result in unconsciousness and death.
– Always make sure there is sufficient ventilation
when running the engine.
– Use effective exhaust extraction when starting or
running the engine in an enclosed space.
– Start the engine and allow it to warm up.
To Next Page