COMBINATION INSTRUMENT 7
73
7.17.15 ABS
V01184-02
Condition
• The motorcycle is stationary.
– Press SET button when the menu is closed.
– Press the UP or DOWN button until Motorcycle is marked. Press
the SET button to open the menu.
– Press the UP or DOWN button until ABS is marked. Press
the SET button to open the menu.
– Activate menu item using the UP or DOWN button.
– Press the SET button to select between ABS modes.
Info
If the ABS mode Road is enabled, ABS controls both
wheels.
If the ABS mode Super Moto is enabled, ABS only con-
trols the front wheel. The rear wheel is not controlled
by ABS and may lock during braking maneuvers. The
ABS warning lamp flashes slowly to remind you that the
Super Moto ABS mode is enabled.
Press and
hold the SET
button for 3-5
seconds.
Activation of the different ABS modes.
To Next Page
Loading...
