KTM 390 DUKE 2021 - Chassis Tightening Torques

TECHNICAL DATA 22
237
Spring preload
Standard 5 clicks
Static sag 14 mm (0.55 in)
Riding sag 47 mm (1.85 in)
Fitted length 304 mm (11.97 in)
22.9 Chassis tightening torques
Screw, chain guard EJOT PT
®
K60x30 7 Nm (5.2 lbf ft)
Remaining screws, chassis M4 4 Nm (3 lbf ft)
Remaining nuts, chassis M5 5 Nm (3.7 lbf ft)
Remaining screws, chassis M5 5 Nm (3.7 lbf ft)
Screw, chain guard M5 7 Nm (5.2 lbf ft)
Loctite
®
243™
Screw, compensating tank cap
lock, rear brake
M5 9 Nm (6.6 lbf ft)
Screw, fuel tank cover M5 4 Nm (3 lbf ft)
Screw, outer clutch cable guide M5 5 Nm (3.7 lbf ft)
Loctite
®
243™
Screw, side stand sensor M5 5 Nm (3.7 lbf ft)
Loctite
®
243™
Screw, tail light M5 5 Nm (3.7 lbf ft)
Nut, foot brake lever adjustment M6 9 Nm (6.6 lbf ft)