Need help?Do you have a question about the KTM 450 EXC-F 2022 and is the answer not in the manual?
General| Displacement | 449.9 cc |
|---|---|
| Bore x Stroke | 95 mm x 63.4 mm |
| Compression Ratio | 12.75:1 |
| Fuel System | Electronic Fuel Injection |
| Throttle Body | 42 mm |
| Transmission | 6-speed |
| Final Drive | Chain |
| Front Brake | 260 mm disc |
| Rear Brake | 220 mm disc |
| Starter | Electric Starter |
| Engine Type | Single Cylinder, 4-Stroke |
| Front Suspension | WP XPLOR 48 |
| Rear Suspension | WP XPLOR shock absorber |
| Seat Height | 960 mm |
| Frame | Central tube frame made of chrome molybdenum steel tubing |
Details the initial steps for unpacking the motorcycle and preparing it for setup.
Provides steps to check and verify the correct headlight beam setting.
Explains how to adjust the headlight's range for optimal visibility and safety.
Guides through the process of mounting and securing the motorcycle's shock absorber.
Details the steps for installing the front fork legs, including tightening specifications.
Outlines the procedure for installing the front wheel, including safety warnings.
Guides on how to safely disconnect the negative terminal of the 12-V battery.
Explains the correct procedures and warnings for charging the 12-V battery.
Provides essential information and safety precautions for refueling the motorcycle.
Lists specific tightening torques for various chassis screws and bolts.
To Next Page