KTM 350 EXC-F 2022 User Manual (English)

Other manuals for KTM 350 EXC-F 2022

Questions and Answers:

J
Jonathan WilkersonAug 18, 2025
What to do if my KTM Motorcycle engine turns but does not start?
- J
  jonesjohnAug 18, 2025
  If your KTM Motorcycle engine turns but doesn't start, several factors could be at play. First, ensure the start procedure is correctly followed. Check that the quick release coupling is joined. Blown fuses (Fuse 1 or Fuse 4) can also prevent starting, so replace them. Other potential causes include an incorrectly set idle speed (adjust it), a sooty or wet spark plug (clean, dry, or replace it), or a spark plug gap that's too wide (adjust to 1.0 mm). Also, the ignition system may be defective, so verify it. Finally, check the wiring harness for frayed cables and the electronic fuel injection for errors (using the KTM diagnostics tool).
V
Victoria NealAug 20, 2025
What causes a KTM 350 EXC-F 2022 Motorcycle engine to have too little power?
- J
  Jermaine MartinAug 21, 2025
  If your KTM Motorcycle engine has too little power, several factors could be responsible. A heavily contaminated air filter can restrict airflow, so clean the air filter and air filter box. A very dirty fuel filter or fuel screen can also limit power, so replace them. Additionally, an error in the electronic fuel injection system could be the cause, so read out the fault memory using the KTM diagnostics tool. Leaks in the exhaust system, a deformed system, or too little glass fiber yarn filling in the main silencer can also reduce power, so check for damage and replace the glass fiber yarn filling if needed. Finally, insufficient valve clearance can impact performance, so adjust the valve clearance.
M
Marcus BensonAug 23, 2025
Why KTM Motorcycle engine does not speed up?
- H
  hardingsheilaAug 23, 2025
  If your KTM Motorcycle engine does not speed up, it could be due to an error in the electronic fuel injection system. Use the KTM diagnostics tool to read the fault memory. Another potential cause is a defective ignition system. In this case, check the secondary winding of the ignition coil, the spark plug connector, and the stator winding of the alternator.
J
John EllisAug 26, 2025
What to do if KTM 350 EXC-F 2022 engine dies during the trip?
- D
  Daisy RomeroAug 26, 2025
  If your KTM Motorcycle engine dies during the trip, the most straightforward reason could be a lack of fuel, so refuel. Alternatively, a blown Fuse 1 or Fuse 4 can cause the engine to stop, so replace the fuses of individual electrical power consumers.
J
James BentonAug 28, 2025
How to troubleshoot KTM 350 EXC-F 2022 Motorcycle engine that cannot be cranked?
- A
  Anthony FoxAug 28, 2025
  If your KTM Motorcycle engine cannot be cranked by the starter motor, it could be due to several reasons. First, ensure you are following the correct start procedure. A discharged 12-V battery can also prevent cranking, so charge the battery and check the charging voltage, open-circuit current, and stator winding. A blown main fuse can also be the culprit, so replace it. Additionally, the starter relay or the starter motor itself could be defective, requiring a check.
J
Julia GonzalezAug 30, 2025
Why does my KTM 350 EXC-F 2022 Motorcycle engine overheat?
- B
  Betty HurstAug 30, 2025
  If your KTM Motorcycle engine overheats, several issues could be responsible. Begin by checking the coolant level and inspecting the cooling system for leaks. Ensure sufficient airflow, especially when stationary (switch off the engine). Dirty radiator fins can also cause overheating, so clean them. Other potential causes include foam formation in the cooling system (drain and refill the coolant), a bent radiator hose (replace it), a defective thermostat (check it), or a defect in the radiator fan system (check the radiator fan fuse, fuse 4, and the radiator fan itself).
J
Joseph HillSep 2, 2025
What does it mean if the malfunction indicator lamp lights up on my KTM 350 EXC-F 2022 Motorcycle?
- L
  Lisa MullinsSep 2, 2025
  If the malfunction indicator lamp lights up or flashes on your KTM Motorcycle, it indicates an error in the electronic fuel injection. Check the wiring for damage and the electrical plug-in connectors for corrosion and damage. Then, read out the fault memory using the KTM diagnostics tool.
C
Carrie VelezSep 4, 2025
What causes high oil consumption in a KTM 350 EXC-F 2022?
- H
  hoffmanstephanieSep 4, 2025
  High oil consumption in your KTM Motorcycle can stem from several causes. A bent engine vent hose can be the culprit, so ensure it's routed without bends or replace it if necessary. An engine oil level that's too high can also lead to increased consumption, so check the engine oil level. Using an engine oil that is too thin (low viscosity) can contribute to the issue, so change the engine oil and oil filter, and clean the oil screen. Lastly, worn piston and cylinder components can increase oil consumption, so measure the piston/cylinder mounting clearance.
M
Mr. Paul Sanchez MDSep 7, 2025
Why is my KTM Motorcycle 12-V battery discharged?
- P
  Pamela CarterSep 7, 2025
  If your KTM Motorcycle's 12-V battery is discharged, it could be because the alternator is not charging it. Check the charging voltage and the stator winding of the alternator. Another possibility is an unwanted electrical power consumer draining the battery, so check the open-circuit current.
A
Amber MitchellSep 9, 2025
Why are the lights not working on my KTM 350 EXC-F 2022 Motorcycle?
- S
  Stephen WilsonSep 9, 2025
  If the high beam, low beam, tail light, position light, and license plate lamp are not working on your KTM Motorcycle, it is likely due to a blown Fuse 2. Replace the fuse.

KTM 350 EXC-F 2022 Specifications

General

Displacement	349.7 cm³
Bore x Stroke	88 mm x 57.5 mm
Starter	Electric starter
Transmission	6-speed
Cooling	Liquid cooled
Front Suspension	WP XPLOR-USD, Ø 48 mm
Seat Height	960 mm
Ground Clearance	370 mm
ABS	No
Engine Type	Single Cylinder, 4-Stroke Engine
Fuel System	Keihin EFI, 42 mm Throttle Body
Rear Suspension	WP XPLOR shock absorber
Front Brake	260 mm disc brake
Rear Brake	220 mm disc brake
Frame	Central double-cradle type 25CrMo4 steel

Summary

DEAR KTM CUSTOMER

MEANS OF REPRESENTATION

Symbols used

Explains the meaning of symbols used in the manual for clarity and safety.

Formats used

Explains typographical formats used in the document for consistent interpretation.

SAFETY ADVICE

Use definition – intended use

Defines the intended use and limitations of the vehicle for proper operation.

Misuse

Describes potential dangers from using the vehicle improperly.

Safety advice

General guidelines and warnings for safe operation of the motorcycle.

Degrees of risk and symbols

Explains danger, warning, caution, and note symbols for risk identification.

Overview of labels

Identifies and explains various labels affixed to the motorcycle.

Reporting safety defects

Instructions for reporting vehicle safety defects to relevant authorities.

Noise emission warranty

Information regarding the warranty for the exhaust system's noise compliance.

Operating noise warning

Warning about increased noise levels and potential penalties.

Manufacturer warranty for the exhaust monitoring system

Details the warranty for the vehicle's emission control system.

Consumer rights

Information on warranty claims and consumer rights.

Tampering warning

Warning against tampering with noise control systems.

Safe operation

Critical safety advice for operating the vehicle.

Protective clothing

Recommends appropriate protective clothing for riding.

Work rules

Guidelines for performing maintenance and repairs safely.

Environment

Advice on environmental responsibility and fluid disposal.

Owner's Manual

Emphasizes the importance and usage of the owner's manual.

IMPORTANT NOTES

Manufacturer warranty, implied warranty

Details warranty coverage and conditions for voiding claims.

Fuel, auxiliary substances

Information on proper fuel and auxiliary substance use.

Spare parts, technical accessories

Guidelines on using approved spare parts and accessories.

Service

Emphasizes the importance of proper service for longevity.

Figures

Notes that figures may depict special equipment.

Customer service

Information on contacting customer service for questions.

VIEW OF VEHICLE

View of vehicle, front left (example)

Illustrates and labels major components from the front left.

View of vehicle, rear right (example)

Illustrates and labels major components from the rear right.

SERIAL NUMBERS

Vehicle identification number

Location of the VIN on the steering head.

Type label

Identifies the location of the vehicle's type labels.

Key number

Location of the key number on the KEYCODECARD.

Engine number

Location of the engine number on the engine casing.

Fork part number

Location of the fork part number.

Shock absorber article number

Location of the shock absorber article number.

CONTROLS

Clutch lever

Describes the clutch lever and its function.

Hand brake lever

Describes the hand brake lever and its function.

Throttle grip

Describes the throttle grip and its function.

Horn button

Describes the horn button and its operation.

Light switch

Explains the operation of the light switch.

Turn signal switch

Explains the operation of the turn signal switch.

Emergency OFF switch

Describes the function of the emergency OFF switch.

Start button

Describes the operation of the start button.

Overview of indicator lamps

Explains the meaning of the dashboard indicator lamps.

Ignition lock

Describes the function and positions of the ignition lock.

Opening the fuel tank filler cap

Instructions for opening the fuel tank filler cap.

Closing the fuel tank filler cap

Instructions for closing the fuel tank filler cap.

Cold start button

Explains the function and operation of the cold start button.

Idle speed adjusting screw

Describes how to adjust the idle speed.

Shift lever

Identifies the shift lever and shows gear positions.

Foot brake lever

Describes the location and function of the foot brake lever.

Side stand

Explains the side stand and its use.

Steering lock

Location and function of the steering lock.

Locking the steering

Step-by-step guide to locking the steering.

Unlocking the steering

Step-by-step guide to unlocking the steering.

COMBINATION INSTRUMENT

Combination instrument overview

Provides an overview of the display and its buttons.

Activation and test

Explains how to activate and test the combination instrument.

Setting kilometers or miles

Guide to changing the unit of distance measurement.

Setting the combination instrument

Instructions for activating and deactivating functions.

Setting the clock

Step-by-step guide to setting the clock.

Viewing the lap time

How to view recorded lap times.

Display mode SPEED (speed)

How to display current vehicle speed.

Display mode SPEED/H (operating hours)

How to view engine operating hours.

Setup menu

Accessing and navigating the setup menu.

Setting the unit of measurement

Guide to setting units like Km/h or Mph.

Display mode SPEED/CLK (time)

How to display the current time.

Setting the clock

Detailed steps for setting the clock.

Display mode SPEED/LAP (lap time)

How to use the display for lap timing.

Viewing the lap time

How to view recorded lap times and reset.

Display mode SPEED/ODO (odometer)

How to view the total distance traveled.

Display mode SPEED/TR1 (trip master 1)

How to use trip meter 1 for measuring distances.

Display mode SPEED/TR2 (trip master 2)

How to use trip meter 2 for measuring distances.

Adjusting TR2 (trip master 2)

How to manually adjust trip meter 2.

Display mode SPEED/A1 (average speed 1)

How to view average speed calculation 1.

Display mode SPEED/A2 (average speed 2)

How to view average speed calculation 2.

Display mode SPEED/S1 (stop watch 1)

How to use stop watch 1.

Display mode SPEED/S2 (stop watch 2)

How to use stop watch 2.

Table of functions

Summarizes functions and their operations.

Table of conditions and menu activation

Lists conditions for activating instrument menus.

PREPARING FOR USE

Advice on preparing for first use

Essential advice before the first ride.

Running-in the engine

Guidelines for the engine break-in period.

Starting power of lithium-ion batteries at low temperatures

Information on battery performance in cold conditions.

Preparing the vehicle for difficult operating conditions

How to prepare the vehicle for challenging environments.

Preparing the vehicle for riding on dry sand

Specific preparations for riding in dry sand.

Preparing the vehicle for riding on wet sand

Specific preparations for riding in wet sand.

Preparing the vehicle for riding on wet and muddy circuits

Preparations for riding in wet, muddy conditions.

Preparing vehicle for high temperatures or slow riding

Adjustments for riding in hot weather or slow conditions.

Preparing the vehicle for low temperatures or snow

Preparations for riding in cold or snowy conditions.

RIDING INSTRUCTIONS

Checks and maintenance measures when preparing for use

Pre-ride checks and maintenance checklist.

Starting the vehicle

Step-by-step instructions for starting the engine.

Starting off

How to begin riding after starting the engine.

Shifting, riding

Guidance on gear shifting and riding techniques.

Braking

Essential advice and warnings on braking.

Stopping, parking

Procedures and precautions for stopping and parking.

Transporting

Instructions and warnings for transporting the motorcycle.

Refueling

Safe procedures and precautions for refueling.

SERVICE SCHEDULE

Additional information

Notes on service intervals and local conditions.

Required work

Lists mandatory maintenance tasks at various intervals.

Recommended work

Lists recommended maintenance tasks at various intervals.

TUNING THE CHASSIS

Checking the basic chassis setting with rider's weight

How to set up the chassis based on rider weight.

Compression damping of the shock absorber

Explains high-speed and low-speed compression damping.

Adjusting the low-speed compression damping of the shock absorber

Guide to adjusting low-speed compression damping.

Adjusting the high-speed compression damping of the shock absorber

Guide to adjusting high-speed compression damping.

Adjusting the rebound damping of the shock absorber

Guide to adjusting rebound damping of the shock absorber.

Measuring the dimension of the rear wheel unloaded

Procedure for measuring rear wheel unloaded dimension.

Checking the static sag of the shock absorber

How to check the static sag of the rear shock absorber.

Checking the riding sag of the shock absorber

How to check the riding sag of the rear shock absorber.

Adjusting the spring preload of the shock absorber

Guide to adjusting the rear shock absorber spring preload.

Adjusting the riding sag

How to adjust the riding sag of the shock absorber.

Checking the basic setting of the fork

Checking the initial fork setup.

Adjusting the compression damping of the fork

Guide to adjusting fork compression damping.

Adjusting the rebound damping of the fork

Guide to adjusting fork rebound damping.

Handlebar position

Details on handlebar mounting holes and positions.

Adjusting the handlebar position

Instructions for adjusting handlebar position.

SERVICE WORK ON THE CHASSIS

Raising the motorcycle with the lift stand

Procedure for safely lifting the motorcycle.

Removing the motorcycle from the lift stand

Procedure for removing the motorcycle from the lift.

Bleeding the fork legs

Steps for bleeding air from the fork legs.

Cleaning the dust boots of the fork legs

How to clean the fork leg dust boots.

Removing the fork protector

Steps for removing the fork protector.

Installing the fork protector

Steps for installing the fork protector.

Removing the fork legs

Procedure for removing the fork legs.

Installing the fork legs

Procedure for installing the fork legs.

Removing the lower triple clamp

Steps to remove the lower triple clamp.

Installing the lower triple clamp

Steps to install the lower triple clamp.

Checking the steering head bearing play

How to check for play in the steering head bearing.

Adjusting the steering head bearing play

Guide to adjusting steering head bearing play.

Lubricating the steering head bearing

Procedure for lubricating the steering head bearing.

Removing front fender

Steps to remove the front fender.

Installing front fender

Steps to install the front fender.

Removing the shock absorber

Procedure for removing the rear shock absorber.

Installing the shock absorber

Procedure for installing the rear shock absorber.

Removing the seat

Steps to remove the motorcycle seat.

Mounting the seat

Steps to mount the motorcycle seat.

Removing the air filter box cover

Steps to remove the air filter box cover.

Installing the air filter box cover

Steps to install the air filter box cover.

Removing the air filter

Procedure for removing the air filter.

Installing the air filter

Procedure for installing the air filter.

Cleaning the air filter and air filter box

Instructions for cleaning the air filter and box.

Preparing air filter box cover for securing

Modifying the air filter box cover for securing.

Removing the main silencer

Steps to remove the exhaust silencer.

Installing the main silencer

Steps to install the exhaust silencer.

Cleaning the spark arrestor

Instructions for cleaning the spark arrestor.

Changing the glass fiber yarn filling of the main silencer

How to change the silencer's internal filling.

Removing the fuel tank

Procedure for removing the fuel tank.

Installing the fuel tank

Procedure for installing the fuel tank.

Checking for chain dirt accumulation

How to check the motorcycle chain for dirt.

Cleaning the chain

Instructions for cleaning the motorcycle chain.

Checking the chain tension

How to check the chain tension.

Adjusting the chain tension

Guide to adjusting the motorcycle chain tension.

Checking the chain, rear sprocket, engine sprocket, and chain guide

How to inspect drivetrain wear components.

Checking the frame

How to check the motorcycle frame for damage.

Checking the link fork

How to check the motorcycle's link fork for damage.

Checking the throttle cable routing

How to check throttle cable routing.

Checking the rubber grip

How to check handlebar grips for wear.

Adjusting the basic position of the clutch lever

How to adjust the clutch lever position.

Checking/correcting the fluid level of the hydraulic clutch

How to check and correct clutch fluid level.

Changing the hydraulic clutch fluid

Step-by-step guide to changing clutch fluid.

BRAKE SYSTEM

Checking the free travel of the hand brake lever

How to check hand brake lever free travel.

Adjusting the free travel of the handbrake lever

Guide to adjusting hand brake lever free travel.

Checking the brake discs

How to inspect brake discs for wear and damage.

Checking the front brake fluid level

How to check front brake fluid level.

Adding the front brake fluid

Guide to adding front brake fluid.

Checking the front brake linings

How to check front brake lining thickness and condition.

Changing the brake linings of the front brake

Steps to change front brake linings.

Checking the free travel of foot brake lever

How to check foot brake lever free travel.

Adjusting the basic position of the foot brake lever

Guide to adjusting foot brake lever position.

Checking the rear brake fluid level

How to check rear brake fluid level.

Adding rear brake fluid

Guide to adding rear brake fluid.

Checking the rear brake linings

How to check rear brake lining thickness and condition.

Changing the rear brake linings

Steps to change rear brake linings.

WHEELS, TIRES

Removing the front wheel

Procedure for removing the front wheel.

Installing the front wheel

Procedure for installing the front wheel.

Removing the rear wheel

Procedure for removing the rear wheel.

Installing the rear wheel

Procedure for installing the rear wheel.

Checking the tire condition

How to inspect tires for cuts, damage, and tread depth.

Checking tire pressure

How to check and set tire pressure.

Checking spoke tension

How to check and adjust spoke tension.

ELECTRICAL SYSTEM

Removing the 12-V battery

Procedure for removing the 12V battery.

Installing the 12-V battery

Procedure for installing the 12V battery.

Charging the 12-V battery

Instructions for charging the 12V battery.

Changing main fuse

How to replace the main fuse.

Changing the fuses of individual electrical power consumers

How to replace fuses for specific components.

Removing the headlight mask with the headlight

Steps to remove the headlight assembly.

Installing the headlight mask with the headlight

Steps to install the headlight assembly.

Changing the headlight bulb

How to replace the headlight bulb.

Checking the headlight setting

Procedure to check and adjust headlight aim.

Adjusting the headlight range

Guide to adjusting the headlight beam range.

Changing the turn signal bulb

How to replace a turn signal bulb.

Changing the combination instrument battery

How to replace the combination instrument battery.

Diagnostics connector

Location of the diagnostics connector.

COOLING SYSTEM

Cooling system

Overview of the cooling system components.

Checking the antifreeze and coolant level

How to check coolant and antifreeze levels.

Checking the coolant level

Detailed procedure for checking coolant level.

Draining the coolant

Steps to drain the engine coolant.

Refilling coolant

Guide to refilling the engine coolant.

Changing the coolant

Steps for changing the engine coolant.

TUNING THE ENGINE

Checking the play in the throttle cable

How to check throttle cable play.

Adjusting the play in the throttle cable

Guide to adjusting throttle cable play.

Adjusting the characteristic map of the throttle response

How to adjust throttle response characteristics.

Adjusting the idle speed

Guide to adjusting the engine idle speed.

Programming the throttle valve position

How to reprogram the throttle valve position.

Checking the basic position of the shift lever

How to check the shift lever's basic position.

Adjusting the basic position of the shift lever

Guide to adjusting the shift lever's basic position.

SERVICE WORK ON THE ENGINE

Changing the fuel screen

Procedure for changing the fuel screen.

Checking the engine oil level

How to check the engine oil level.

Changing the engine oil and oil filter, cleaning the oil screen

Complete guide to oil and filter change, screen cleaning.

Adding engine oil

How to add engine oil to the correct level.

CLEANING, CARE

Cleaning the motorcycle

Instructions for cleaning the motorcycle safely.

Checks and maintenance steps for winter operation

Specific maintenance for winter storage and use.

STORAGE

Storage

Procedures for storing the motorcycle for extended periods.

Preparing for use after storage

Steps to take before using the motorcycle after storage.

TROUBLESHOOTING

TECHNICAL DATA

Engine

Technical specifications for the engine.

Engine tightening torques

Torque specifications for engine components.

Capacities

Fluid capacities for engine oil, coolant, and fuel.

Chassis

Technical specifications for the chassis and suspension.

Electrical system

Electrical system specifications and component details.

Tires

Tire specifications and information.

Fork

Technical data for the front fork.

Shock absorber

Technical data for the rear shock absorber.

Chassis tightening torques

Torque specifications for chassis components.

SUBSTANCES

Brake fluid DOT 4 / DOT 5.1

Specifications and recommendations for brake fluid.

Coolant

Specifications and recommendations for coolant.

Engine oil (SAE 10W/50)

Specifications and recommendations for engine oil.

AUXILIARY SUBSTANCES

Air filter cleaner

Recommended cleaner for the air filter.

Chain cleaner

Recommended cleaner for the drive chain.

Fuel additive

Recommended additive for fuel.

High viscosity grease

Recommended high viscosity grease.

Long-life grease

Recommended long-life grease.

Motorcycle cleaner

Recommended cleaner for the motorcycle.

Off-road chain spray

Recommended chain spray for off-road use.

Oil for foam air filter

Recommended oil for foam air filters.

Preserving materials for paints, metal and rubber

Recommended products for preserving surfaces.

STANDARDS

INDEX OF SPECIAL TERMS

LIST OF ABBREVIATIONS

LIST OF SYMBOLS

Yellow and orange symbols

Explains warning symbols related to errors.

Green and blue symbols

Explains informational symbols.

Related product manuals

KTM 350 EXC-F EU 2021

182 pages

KTM 350 EXC-F SIX DAYS 2023

KTM 350 EXC-F EU 2012

292 pages

KTM 350 EXC-F EU 2018

174 pages

KTM 350 EXC-F EU 2013

124 pages

KTM 350 EXC-F 2022 User Manual

Table of Contents

Other manuals for KTM 350 EXC-F 2022

Questions and Answers:

KTM 350 EXC-F 2022 Specifications

Summary

DEAR KTM CUSTOMER

MEANS OF REPRESENTATION

Symbols used

Formats used

SAFETY ADVICE

Use definition – intended use

Misuse

Safety advice

Degrees of risk and symbols

Overview of labels

Reporting safety defects

Noise emission warranty

Operating noise warning

Manufacturer warranty for the exhaust monitoring system

Consumer rights

Tampering warning

Safe operation

Protective clothing

Work rules

Environment

Owner's Manual

IMPORTANT NOTES

Manufacturer warranty, implied warranty

Fuel, auxiliary substances

Spare parts, technical accessories

Service

Figures

Customer service

VIEW OF VEHICLE

View of vehicle, front left (example)

View of vehicle, rear right (example)

SERIAL NUMBERS

Vehicle identification number

Type label

Key number

Engine number

Fork part number

Shock absorber article number

CONTROLS

Clutch lever

Hand brake lever

Throttle grip

Horn button

Light switch

Turn signal switch

Emergency OFF switch

Start button

Overview of indicator lamps

Ignition lock

Opening the fuel tank filler cap

Closing the fuel tank filler cap

Cold start button

Idle speed adjusting screw

Shift lever

Foot brake lever

Side stand

Steering lock

Locking the steering

Unlocking the steering

COMBINATION INSTRUMENT

Combination instrument overview

Activation and test

Setting kilometers or miles

Setting the combination instrument

Setting the clock

Viewing the lap time

Display mode SPEED (speed)

Display mode SPEED/H (operating hours)

Setup menu

Setting the unit of measurement

Display mode SPEED/CLK (time)

Setting the clock

Display mode SPEED/LAP (lap time)

Viewing the lap time