To Next Page

To Previous Page

ENGLISH

Short circuit button (SX/MXC)

The short circuit button 1 turns off the engine. When pressing this button,

the ignition circuit is short-circuited.

Combination switch (EXC)

The light switch has 2, respectively 3 switch positions.

A = Light off (this function is not available in all models)

B = Low beam on

C = High beam on

You may use button

2 to actuate the horn.

The red short circuit button

3 serves to switch off the engine. Leave the

switch pressed until the engine stops.

Headlamp switch (EXC USA)

In this model the headlamp is switched on with the pull switch 4.

Flasher switch

The flasher switch is a separate unit and is mounted on the left portion of

the handlebar.

The wire harness is designed in a way that whenever you want to use your

bike off-road, you can dismount the entire turn indicator system without

affecting the function of the remaining electrical system.

Flasher left

Flasher right

Starter button (EXC)

Pushing the black starter button 5 will actuate the E-starter.

Questions and Answers:

Need help?

Do you have a question about the KTM 450 SX 2004 and is the answer not in the manual?

KTM 450 SX 2004 Specifications

General