EasyManua.ls Logo

KTM 65 SX 2001 - Technical Data - Engine

KTM 65 SX 2001
31 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGLISH
27
Engine CR-63
Design Liquid cooled single cylinder two-stroke engine with reed valve intake
Displacement 63,58 ccm
Bore/stroke 45 / 40 mm (1,77/1,57 in)
Compression ratio 9,1 : 1
Fuel SUPER fuel, research octane no 95, mixed with high grade two stroke oil
Oil/gasoline ratio 1 : 40 when using high grade two stroke oil (i.ex. Shell Advance Racing X),
when in doubt, please contact our importer
Lubrication mixture lubrication
Crankshaft bearing 2 deep-groove ball bearing
Connecting rod bearing needle bearing
Piston pin bearing needle bearing
Piston rings 1 compression ring
Primary drive straight cut spur gears, 23:75 t
Transmission 6 speed, claw actuated
Gear ratio 1
st
gear 13 : 37
2
nd
gear 16 : 34
3
rd
gear 18 : 31
4
th
gear 21 : 30
5
th
gear 23 : 28
6
th
gear 24 : 26
Transmission oil 0,30 liter (0,0792 USgal) gear oil SAE 80 EP (z B. Shell Advance Gear 80 EP)
Ignition system contactless controlled ignition (Selettra NW21)
Spark plug NGK BR 9 EGV
Electrode gap 0,60 mm (0,0236 in)
Carburetor Mikuni VM 24
Coolant 0,55 liter (0,145 Usgal), mixture coolant : water = 2 : 1, at least -25° C (-13° F)
Air filter wet foam type air filter insert
TECHNICAL SPECIFICATIONS - ENGINE 65 SX 2001

Table of Contents